No nails required
The method of fixing the mirror to the bathroom wall is as follows:
1. Adhesive installation: first use transparent tape on the back of the waterproof mirror , and then use a glass glue stick, surrounded by a glass and plastic seal, which is to prevent mercury glass, plastic and waterproof mirrors from chemical reactions, and the seal around the mirror is to keep the back of the mirror from dirt entering;
Installation: Drill the mirror with a glass drill bit and install the wall drill with a pistol, put a plastic expansion tube, decorative cover with glass nails, surround and seal with glass, plastic
2. Dip foam Double-sided tape and then apply neutral sealant around it. It must be neutral, as acidic ones will corrode the film on the back of the glass. If the transparent tape is stained, the tape will deteriorate.
3. Use expansion bolts and pay attention to the type of ceramic tile when drilling. If it is all-ceramic, use a rhinestone and drill it bit by bit. Otherwise, it will be very easy to crack.
4. Use glass bricks to make holes in the glass and fix them with advertising nails.
5. Decorative mirror frames can also be fixed.
The installation height of the bathroom mirror:
In the bathroom, you usually stand and look in the mirror. The distance between the bottom edge of the bathroom mirror and the ground should be at least 135 cm. If the height difference between family members is relatively large, It's big and can be adjusted up and down. Try to keep your face in the middle of the mirror, so that the imaging effect is better. Under normal circumstances, it is better to keep the center of the mirror 160-165 cm above the ground.