Place the pressure tank horizontally near the water source. When installing the water pump, the check valve should be made by the same manufacturer or of good quality, because the check valve is a very important valve in the whole water supply system. If it is loose, it is easy to cause water leakage or water backflow, so it can be made of pure copper for home use. Install corrugated pipes and faucets at the sewage outlet to facilitate the discharge of impurities and dirt at any time, carefully check the water outlet pipe and water inlet, and take sun protection and waterproof measures for the pipeline.
Extended data:
Precautions:
The tower-less water supply device is generally not recommended to be used on the roof and other high places, because water may be discharged from the roof due to natural pressure, resulting in negative pressure in the tank, which leads to the absorption and contraction of negative pressure in the tank.
Tower-less water supply device needs to be equipped with a pump with sufficient lift. If the lift is insufficient, the pressure gauge value will not go up and the water pressure will be insufficient.
The installation site should be arranged in a sun-proof, rain-proof, ventilated and dry place as far as possible, and the distance between water source, water pump and water tank should not be too far, so as not to increase the pipeline pressure.
Baidu encyclopedia-pressure tank