Size of rural doors and windows Geely Table 6 Selection steps of doors and windows

When building a house in rural areas, we will also consider many issues, such as how big the windows are and how big the gates are. These are also what we need to consider, so what kind of doors and windows are better? Next, some questions about the auspicious table of rural door and window sizes are introduced, as well as the six steps of door and window selection. When building a house in rural areas, we will also consider many issues, such as how big the windows are and how big the gates are. These are also what we need to consider, so what kind of doors and windows are better? Next, let's introduce the auspicious table of rural door and window size and the six steps of door and window selection. Let's have a look.

Rural doors and windows size Geely table

First of all, the size of the door

1. The size of the gate is proportional to the house. The height of the gate is 3 and 9, the height is 2.9 and the width is 2.8.

2. If the master-slave door is adopted, the size is 1200? In 2000, the width and height of unit doors were not less than 2000 and 2200 respectively. The size of the courtyard entrance door is 1.5 m or 1 m 1.8 m. ..

3. Indoor doors are generally 900? 2200mm, indoor doorman is generally 800mm? 2200mm, double doors 1300mm? 2200mm or 1500mm? 2200 mm.

Second, the window size in rural areas.

1. The height of the toilet varies from the window height 1.2m to 1.4m, and the window width usually varies from 0.8m to1.2m. ..

2. In the living room, the window sill is generally about 90cm high, and the window is between 145 cm- 155 cm, while the window sill of the floor-to-ceiling window is generally about 20cm above the ground, and the width depends on the specific situation.

3. Can the window size of rural kitchen be 1200? 1500mm、 1500? 1800mm、 1800? 2400 mm.

4. rural bedroom window master bedroom window size 1200? 1500mm- 1500? 1800mm; What is the size of the window on the side 1500? 1800mm- 1800? 2 100 mm

Six steps of door and window selection

First, determine the type of configuration file. The mainstream profiles in the door and window market are mainly broken bridge aluminum, plastic steel and aluminum wood. Broken bridge aluminum is an upgraded version of the original aluminum alloy window, and a heat insulation strip is installed between the two profiles, which solves the problem of heat insulation of the previous single aluminum alloy profile and the difficulty in deformation of plastic steel strength. It is the most mainstream profile for home decoration doors and windows in China. The advantage of plastic steel is that the profile has poor thermal conductivity and the heat transferred through the window frame is very small. Good sealing, strong heat insulation ability; The advantage of aluminum wood also lies in its strong heat preservation ability and high value.

Secondly, select the window type. Xin Dongying: I suggest using sliding windows in the bathroom and kitchen to facilitate the ventilation. If there are well-sealed partition sliding doors indoors, life balcony can use sliding windows, and other places can choose external windows or internal windows according to their living habits.

Third, choose a series. When merchants introduce broken bridge window products to you, they are likely to say that the larger the series, the better the performance of doors and windows such as thermal insulation and sound insulation. In fact, the bigger the series you buy, the more money the merchant may make. The increase of serial number does not mean the improvement of performance, but the widening of section.

Fourth, choose the seal. Merchants often say: the more roads are closed, the better. This statement is not credible. Generally, as long as the outer, inner and middle seals are well done, it is enough to have a good sealing effect. Sealing is about quality, not quantity.

Five, choose the press-in tape. Press-in adhesive tape can be seamlessly connected at the corner of the window without violent cutting, which improves the overall sealing performance of doors and windows. It can be replaced more conveniently in the future. It can be observed from the finished window whether the tape at the corner of the window is cut off or whether there are traces of glue sticking.

Sixth, choose the drainage method. Doors and windows without drainage channels are the worst; Secondly, simply cut a hole in the surface as a drainage door and window; Even better, there are special drainage doors and windows to ensure that rainwater is discharged out of the window; The purpose is to have well-designed doors and windows, well-designed drainage holes and matching drainage hole covers, so as not to damage the sealing performance of doors and windows.

The above is an auspicious table about the size of rural doors and windows and six steps of door and window selection. We should know something about these problems. For rural self-built houses, of course, homeowners also need to consider some factors when considering building houses. For example, the architectural styles in the north and south are different, and the installation dimensions of doors and windows will be different, so you can choose according to your own situation.