How to decorate a shower room with water on all sides? What are the precautions when choosing a shower room?

When designing a shower room, remember the total area. You can choose a square shower room for a large space and a round shower room for a small space, which can greatly reduce the use area and make the bathroom look more spacious. It depends on the material of the skeleton. At present, the quality of shower rooms on the market is definitely uneven, but the material of its frame is very important for building a good shower room. Generally speaking, aluminum alloy material is more suitable for home, which is not only affordable, but also not easy to rust after long-term use. In the shower room, splashing water is inevitable, and generally the fully transparent windows are longer.

Water marks are inevitable and will leave traces in it. Cleaning is not only time-consuming and laborious, but also constantly endangers the beauty and generosity of all bathrooms and is completely buried. On the contrary, if the shower room is equipped with such frosted windows, water marks will not appear easily, and the cleaning of the bathroom will be much easier. When installing a shower room, people first think of water, such as how to prevent moisture, how to make water flow out quickly, how to make the road surface as dry as possible or as soon as possible, and so on. These are the main considerations. Needless to say, moistureproof is of course the most important thing, and it must not be sloppy.

Be sure to fill the road, and the wall should be as high as possible, and irrigation experiments should be done. The slope of the ground should be found under the condition of paving, and there should be at least an odor-proof floor drain, so that the water can flow out quickly when taking a bath. Install the rubber magnetic stripe card in the movable glass, put a piece or other things under the place where the movable glass is opened and clamped, put the movable glass on the cushion, adjust the upper surface of the movable glass to be flush with the fixed glass, then connect some thematic activities of the hinge with the movable glass, slightly tighten the hinge screws, then similarly tighten the lower hinge, and then tighten the screws of the left and right hinges after adjusting the movable glass.

The floor design of shower area considers two aspects: drainage pipeline and floor anti-skid. The key point is that a drain can be designed to guide the running water to be discharged immediately during bathing, and some non-slip stones or non-slip floor tiles should be used in the shower area. Material selection of laminated glass in shower room. Because the shower room is composed of laminated glass and hardware, the safety performance of laminated glass is very important. As far as possible, choose explosion-proof membrane to fit glass and its laminated glass. At present, all series of Deli shower room are affixed with 3H high toughness diamond glass explosion-proof film and laminated glass.