Which button is Cheng Kai d60 warm air?

Qichen d60 heater switch is displayed as "thermometer" with red and blue marks on both sides. By turning the knob, the red area gradually increases the temperature. The automatic air conditioner also allows you to set a temperature, and then press the "Auto" button, and the automatic air conditioner will automatically adjust according to the temperature in your car. To turn on the d60 heater, you need to press the cycle button in the air conditioning area. First, adjust the temperature to above 23 degrees. If the temperature is too high, it will feel too hot. Then, turn on the wind speed gear and adjust the tuyere mode, only for the front windshield and feet, as long as the AC light is turned off. Two opening modes of Kai Chen d60 warm air;

1. Press the wind speed adjustment button directly, which is located next to the automatic air conditioning button. Just press it and it will open.

2, that is, first turn on the front gear for defogging, and the driving computer will automatically adjust the wind speed to the maximum, and the sound will be very noisy, and then press the button to turn off the front gear for defogging, and the driving computer will keep the fan to the minimum by default. At this time, the wind speed can be adjusted as needed, and the warm air will not be directly output if it is too hot. Remember not to use the AC button. If the air conditioning button is on, it means that the air conditioning compressor is started, which will definitely lead to excessive fuel consumption.

Million car purchase subsidy