Did gl 8 replace the small water tank lifting table in 2007?

In 2007, gl 8 replaced the small water tank without lifting workbench, and in 2007, gl8 replaced the evaporation tank without lifting workbench, but it was enough to remove the upper and lower parts of the workbench. Remove the workbench. There are nine screws on the workbench. Pay attention to where there are screws. There are screws inside the lower two edges of the workbench, and there are two screws just above the wheel arch. After the instrument assembly was removed, the whole picture of the heater was leaked. The heater is connected with three screws. Remove the upper one first, and then remove the other two screws. The heater tank can be replaced after it is taken out.

Function of small water tank

The function of the car small water tank is to store antifreeze. The blockage of the small water tank of the automobile will lead to the abnormal cooling of the vehicle, which will lead to the leakage of the water tank, the failure of the vehicle cooling system and the boiling of the water tank or the engine. The damaged small water tank needs to be repaired or replaced in time.

When the engine temperature is high, the liquid expands, and a part of antifreeze flows into the auxiliary water tank through the small water tank. When the temperature drops and the cooling system pressure is negative, the system sucks antifreeze from the auxiliary water tank into the cooling system through the small water tank. Small water tank is an important part of automobile cooling system, which plays a vital role in vehicle cooling.