Don't use a wet mop to wipe directly, but use a special cleaner to clean the wooden floor, so that the floor can keep its original wet texture and natural primary colors, and can prevent wood from cracking.
Note: In order to avoid excessive moisture infiltration into the inner layer of the wood floor, causing mildew, when using the floor cleaner, try to wring the mop dry. If the surface is not polished, it is not suitable for contact with water. It is best to try it in an inconspicuous place and use it in a large area after making sure there is no problem. ?
If you want to avoid long-term trampling and wear of the floor, you can always keep it shiny and bright. After the floor is cleaned, you can apply a layer of wood floor wax maintenance agent. However, it should be noted that the floor must be completely dry before waxing, so as to avoid that the wax layer can not be completely attached to the wooden floor, but it will make the floor appear a little white spots. And it is best to use a flat sponge mop to avoid the cotton wool of the general mop remaining on the floor together with the medicine. ?
According to the floor material, choose the appropriate floor cleaner. Before use, according to the degree of dirt, pour a proper amount of floor cleaner into the bucket for dilution, and then mop the floor from the room to the door.
If corners or floor seams are difficult to clean, you can use an old toothbrush to directly contact the floor cleaner to scrub stubborn dirt that is difficult to wash, or you can directly pour the floor cleaner on a rag, wipe it clean, and then rinse it with clear water.
However, some floor cleaners have higher surfactant concentration, and the semi-wet floor is more likely to be contaminated with dust after mopping the floor, resulting in dirtier results. Therefore, we should pay special attention to choosing products with good reputation. ?