How to deal with the leakage of heating pipe interface?

In order to enjoy heating comfortably during heating, we need to do a good job of inspection and maintenance before. On the 20th, most residential areas have begun to test water. If there is water leakage at the interface of the heating pipe, it needs to be dealt with in time. Let's take a look at it with the golden flagship flag brother.

1. What should I do if the heating pipe interface leaks?

1, if you find the leakage problem of the heating pipe interface, you need to open the position of the heating pipe interface first. The leakage problem is not particularly serious. You can wrap the leaking place with tape, and then check whether the nut is loose. If there is, tighten it, but if the screw is broken, replace it with a new one.

2. If the water leakage problem is serious, it is necessary to stop the leakage. Choose a coagulant and apply it to the leaking joint, but it needs to be wiped clean in the early stage, and then apply it evenly. The plugging effect can be formed after solidification.

3. If the joint is aging, just replace the joint, and related accessories or heating pipes can also be replaced together to avoid the trouble of water leakage again in the later stage.

Second, what problems should be paid attention to when using radiators for heating?

1. Radiator is used for heating, and the safety factor of radiator is relatively high, but after heating, if the heating cycle is not particularly good, it will affect the heating effect.

2. The radiator needs to pay attention to convection, so you can't put some sundries around the radiator, which will hinder the radiator from radiating. Try to keep the periphery of the radiator fresh, and the heating effect will be better.

3. Some people think that the radiator temperature is not enough or unbalanced, so they will release water to balance the water pressure. The correct way is to drain water properly to make the water flow balanced, and then exhaust the radiator.

4. Don't install the circulating pump without permission. Although it can make the heating effect better, it will also affect the normal use of others. The heating company explicitly prohibits the installation of circulating pump without permission.

In the cold winter, if you want to heat smoothly, you must do a good job of investigation. There should be no water leakage at the joint of the heating pipe. At the same time, some problems need to be avoided when using radiator for heating to ensure better heating effect.