1, Design Skills of Villa Renovation-Light Design
The simplest design method is to install floor-to-ceiling glass on the wall, which can double the feeling of villa, especially suitable for long apartment with porch. In addition, large curtains can be installed indoors, which also has the effect of expanding space.
2. Villa renovation design skills-reasonable spatial layout.
Pay attention to the choice of furniture in layout. The furniture in the villa had better not be enlarged or too complicated, so as not to make the space more narrow. In addition, it is necessary to move the position of indoor furniture more to create a sense of freshness psychologically.
3, villa renovation design skills-color matching.
Finally, when designing, we should pay attention to color matching and polish the wall to make the space look bigger. Coupled with white or light-colored furniture, it can improve indoor light and make the room more spacious and bright.
4. Villa renovation design skills-guidance
Villa decoration living room is best located in the first half of the home near the gate, so that it can directly absorb the air entering from the gate. If you have to go through a corridor to reach the living room, then the corridor must be kept clean and tidy, and the light must be sufficient to avoid blocking the air from entering the living room. If it is a mezzanine house design, the living room feng shui should be located on the low floor.
What are the precautions for villa renovation?
First, tear down the wall: from top to bottom.
When rebuilding a villa, it is almost always necessary to tear down the fence. Although most people know that load-bearing walls can't be demolished, there are still doubts about the demolition method of non-load-bearing walls. It is suggested that it must be removed from top to bottom, layer by layer, piece by piece, to avoid hitting it with a sledgehammer, and to prevent harm to human body and stair floor.
Second, wall brick removal: avoid damaging the line.
Don't use too big tools to dismantle the wall. Before construction, make clear the laying of the line and whether it is a load-bearing wall, so as to avoid damaging the buried line or hurting the wall next to the light wall when removing bricks. In addition, the difficulty of wall brick removal is different. Some loose tiles can be removed with a poke, while others are very strong. A small flat drill is recommended.
Third, the floor demolition: must start from the corner.
Although the demolition of the floor is relatively simple, it should not be too careless, especially in the construction of composite floor, the skirting line should be pried open with a screwdriver first, and then the floor in the corner should be pried open along the edge of the skirting line for demolition; The solid wood floor starts from the corner after the skirting line is removed, and the wooden floor is pried out with a nail hammer.
4. Dismantle cabinets and sanitary wares: first remove the connectors.
When removing cabinets and sanitary wares in villa renovation, attention should be paid to removing connectors, such as screws and bayonets. After the water and electricity are cut off, the kitchen sink is dismantled and the countertop is easy to dismantle. In addition to removing the connectors, we should also pay attention to removing the sealant between the sanitary ware and the wall or floor with a file to facilitate the smooth removal of the original sanitary ware.
The above is about the skills and precautions of villa decoration design. If you want to decorate a villa, you should pay attention to the decoration skills and precautions. According to your favorite style and reasonable decoration design, Bian Xiao introduced it here.