Is the top floor waterproof with colored steel tiles? In summer, the temperature is generally high all over the country, and too cold or too hot weather will cause discomfort to the human body. Therefore, the requirements for thermal insulation and waterproofing of the top floor are gradually improved. Although living on the top floor has a good view, it faces the problems of sultry and water leakage. Let's take a look at how to make the top floor waterproof with colored steel tiles.
Is the top floor made of colored steel tiles waterproof? 1 The top floor is waterproof.
1. Causes of water leakage on the top floor: When the developer waterproofing the top floor, some details may not be handled in place, and it will inevitably leak after a long time. Residents on the roof planted some flowers and plants on the roof, which caused the waterproof layer to be destroyed.
The roof structure is unreasonable, like the exterior wall of an old building, which is moldy because of the concrete slab leaking rain. In the past, once a house was built, it would exist forever. Living in the house for a long time without corresponding maintenance will lead to the aging and damage of the waterproof material of the house.
2. Colored steel tiles, also known as colored profiled tiles, are made of colored coated steel plates, which are cold-formed into various wavy profiled steel plates through a series of pressing. It is mainly suitable for the decoration of internal and external walls of industrial and civil buildings, warehouses, special buildings, roofs, walls and long-span steel structure houses. It has the characteristics of light weight, high strength, rich colors, convenient and fast construction, earthquake resistance, fire prevention, rain protection, long service life and maintenance-free, and has been widely popularized and applied.
3. What other methods can be used besides colored steel tiles? The leaking parts can be waterproof again, and the waterproof material can be waterproof coiled material to realize seamless waterproof. Additional strengthening treatment shall be carried out for leakage parts, pipelines, yin and yang angles, etc.
The simplest waterproof method for the top floor:
1, the most economical outdoor waterproofing is to paint asphalt outdoors and make a thick layer of asphalt on the roof. No matter how heavy the rain is, don't worry about water leakage. However, the asphalt is rough and hard, and some small cracks should be repaired with waterproof mortar to ensure that water does not invade the wall. Even in winter, asphalt roofs have excellent waterproof performance.
2. Indoor waterproofing You can choose to coat waterproof mortar on the indoor wall to isolate moisture. If the roof is flat-topped, or there is serious water accumulation on it, you can do more waterproofing. Two-component waterproof mortar not only has good water resistance, but also can effectively resist the distortion and deformation of the house due to aging.
3. In the balcony part, special attention should be paid to the sealing of the joint between the window and the wall. The ground has a slope, and the height difference from the living room or bedroom floor is at least 2-3 cm. The drain should be located in a lower place. The core of the bathroom is floor drain, wall-to-ground joint, nozzle and door stone. Brush other parts twice for waterproofing; These places need to be painted many times; Make a basin-shaped area under the lintel to form the function of storing water and retaining water.
Is the top floor made of colored steel tiles waterproof? Can I build colored steel tiles on the top floor?
It doesn't mean that we can't use colored steel tiles as factory roofs, and we can't use metal-faced polystyrene composite panels (two layers of colored steel plates sandwiched with benzene plates) as roofs, because benzene plates are not completely flame-retardant, so we just need to change them into two layers of colored steel plates sandwiched with rock wool or glass wool, regardless of thermal insulation, and only consider fire prevention.
1. The negligence in production, transportation and construction caused the deformation of colored steel tiles. The quality of color steel tile is poor, and the deformation of color steel tile is caused by master's roof construction.
2, wind, rain and other external forces, resulting in long-term vibration of the color steel tile roof, so that the nail hole and iron joint wear for a long time, rust in the rain. Then it will wear and rust, and it will become more and more serious.
3. Why does the self-tapping nail have a rubber pad or leak water? During the construction, the rubber pad was damaged by self-tapping nails. Second: the rubber pad ages quickly and loses its waterproof effect soon.
Precautions for installation of color steel tile
1, the color steel tile is light in weight and ingenious in structural design, so the installation procedure is relatively simple. But be careful when installing and try not to walk on the tiles. If you need to move on the tile, you should first take safety measures and step on the middle part when walking. This posture has good bearing capacity and can bear the weight of the human body. Don't step on the edge of the color steel tile, for one thing, the bearing capacity is not enough, and for the other, it is easy to slip, which may cause dangerous consequences.
2. Pay attention to the weather when installing colored steel tiles. Do not install in bad weather. If the wind and rain are heavy, it will cause great inconvenience and safety accidents may occur. Construction personnel must be professionals and hold technical qualification certificates. This is the guarantee of the project quality and the responsibility for the personal safety of the staff.
3, the use of skeleton structure must be built firmly, and do a good job of protection and safety warning below, to avoid accidental fall of objects to pedestrians. If there is a large flow of people on the construction site, arrange a person to guide and remind passers-by on the ground.
The best way to waterproof the top floor is to take the colored steel tile, and the installation precautions of the colored steel tile have been introduced to you. Waterproof measures are very important. Colored steel tile is just one of the materials. When installing and using this material, be sure to buy genuine products and the quality can be assured.
Is the top floor made of colored steel tiles waterproof? 1. Is the leaking color steel tile useful?
Advantages and disadvantages of using color steel plate as support cover for roof leakage coexist;
(1) Advantages:
1, and its service life is longer than that of ordinary waterproof materials (SBS waterproofing membrane and waterproof coating, etc.). ), avoiding the trouble of repeated construction in a few years.
2. Because of the overhead intermediate layer, especially the composite color steel plate, the thermal insulation performance can be better improved. Make the indoor temperature more conducive to living, reduce the use of air conditioners and reduce energy consumption.
(2) Disadvantages:
1. Although painted inside and outside, the color steel plate still has a certain life. In particular, some shady roof surfaces are prone to corrosion due to moisture.
2. Compared with cement tile, the service life is greatly reduced. If conditions permit, the purpose of long-term use is to increase investment. It is recommended to use cement tile as waterproof roof for the second time, once and for all!
Second, who can't find the owner to compensate for the water leakage upstairs?
First, find the cause of water leakage in the property, and then who will bear the corresponding responsibility according to the cause: if it is determined that the public drainage pipe is leaking and the developer refuses to repair it during the warranty period, the owner can bring a lawsuit to the court to claim compensation for the loss. If it is clear that the upstairs water pipe is leaking, and the property still refuses to be repaired after mediation, the owner requires the property to provide the information of the upstairs owner and file a lawsuit with the court for compensation.
Three. Matters needing attention for the owner to sign renovation contract.
(1) Write clearly both parties: renovation contract is actually a legal document signed by the owner to contract his decoration project to the decoration company, and the employer and the contractor should be clearly stated in the contract, which is what we usually call both parties.
(2) Representatives of Party A: Generally, the representatives of Party A's home improvement are the owners themselves or family members who can supervise the project by themselves.
(3) Clarify the rights and obligations of the construction party: The rights and obligations that the construction party enjoys and needs to perform should be clearly stipulated in the contract, mainly to formulate the construction plan and construction progress plan in advance and report them to the owner for approval.
(4) The agreed construction period should be detailed: the agreed construction period is not only the agreed completion time, but also the right of both parties to postpone the construction period when problems arise.
(V) Agreed project quality and acceptance content: it should be clearly stated in the contract that the project quality should meet the relevant national standards, and payment should be made in different grades. If qualified, it is the general grade fee.