1. Look at the depth and bay
The depth refers to the length of the room, generally in the north-south direction, and no more than 5 meters is more appropriate. If it exceeds 5 meters, the depth is too deep, which will have a greater impact on the lighting and ventilation of the room. The room bay refers to the width of the house. The width of a room is about 3-4 meters. Generally, the larger the bay, the better. However, if the total area is constant, the larger the bay, the shallower the depth and the square shape of the house.
When everyone buys a house and chooses a house type, choose a square house or a symmetrical house type to avoid odd shapes. If the house has too many corners, it will actually occupy the usable area of ??the house.
2. Look at the house area
Regarding the area, we need to pay attention to two data, the building area and the usable area. The floor plan will indicate the building area. When the house is actually handed over, the area will be determined by the housing management. The results given by a third-party surveying and mapping agency recognized by the department shall prevail (generally not much different from the building area on the house plan). This area will also be written into the real estate certificate or real estate certificate, which has legal effect.
The other is the built-up area within the suite. The built-up area within the suite is deducted from the shared area. This ratio depends on the specific unit type. Usually, the higher the building level, the larger the shared pool, and the larger the shared pool area. The smaller the inner area.
3. Look at the spatial layout
The quality of an apartment is also related to the proportional layout of each function. If the apartment design is not reasonable enough, the living comfort of the residents will be greatly reduced. Whether the house type is reasonable or not, the proportional relationship between various parts is very important. For example: when the total area is not large, it is very common for the second bedroom to have only 9-10 square meters. Such a ratio will inevitably be stretched and difficult to implement in actual use. Therefore, everyone must pay attention to the area ratio of each bay in the house.
4. Look at the floor plan
Through the floor plan, buyers can learn a lot of useful information, such as understanding the floors, stairwells, corridors, and corridors of the entire building. Shafts and other locations. Issues of light and privacy are also reflected in the floor plan.
5. Look at the wall structure
If you are a person who likes changes and has great ideas, and after getting the key, you need to modify the house according to your own preferences, you need to understand House type structure. Know in advance which walls can be moved and which walls must not be moved. Generally speaking, load-bearing walls cannot be moved, while light walls can be demolished. The layout of the pipelines will be marked when the new house is moved in, so it cannot be tampered with during renovation.