1. If the switch handle of the faucet is broken, just replace the handle of the faucet. When replacing the handle, remove all the fixing screws on the handle. Some screws will be blocked by trademarks. We tear off the trademark, unscrew the screws, and finally replace them with new ones, and then screw all the screws back.
2. If the faucet is not closed or there is no way to close it, we need to replace it. There may be something wrong with the core components inside the faucet. The core fixtures inside the faucet are basically disposable. If there is a leak, don't fix it. Just buy a new one and replace the parts inside.
3. If the water stop tape is damaged, you can remove the faucet with a wrench, and then wrap the tape around the threaded hole for about five or six times, so that the tape is closely attached to the threaded hole of the faucet, and then tighten the faucet clockwise with a wrench to see if it leaks. If not, the faucet has been restored.
Matters needing attention in using faucet
1, faucet installation should thoroughly remove all kinds of impurities in the pipeline. The damage, blockage, blockage and leakage of the valve core can be avoided. At the same time, the surface should be cleaned, leaving no building materials residue.
2. When using the faucet, you don't need to use too much force when opening and closing it, just twist or stir it gently, especially don't use the handle as an armrest to support or use it. Products with a mesh cover at the water outlet should be disassembled and cleaned after a period of use to remove impurities.