First of all, if the indoor swimming pool is built on the floor above the first floor, the bearing capacity of the venue should be considered. The floor load-bearing standards of ordinary civil and commercial buildings are generally limited. For the sake of safety, the high-rise swimming pool must be designed by a professional design company at the initial stage of construction. If the bearing capacity is less than per square meter, the floor needs to be reinforced to avoid serious safety hazards.
Secondly, indoor dehumidification should be considered. The pool water on the surface of indoor heated swimming pool is easy to evaporate into indoor air. Water vapor not only increases the humidity value in the swimming pool, making swimmers feel uncomfortable, but also combines with residual chlorine volatilized in the air. Swimmers who inhale chlorine-containing water vapor through breathing will damage the respiratory system, thus affecting their health. Moreover, excessive humidity will form dew, which will corrode and destroy the steel structure and surface decoration of indoor swimming pools. Therefore, when designing an indoor swimming pool, it is necessary to install a special dehumidifier for the swimming pool to reduce the humidity of the indoor swimming pool.
In addition, due to the high humidity of indoor swimming pool, when designing indoor swimming pool, various decorative materials should be carefully selected, and the corrosion resistance of materials should be considered first. For example, walls should be made of light marble or glazed tiles instead of paint or coating. Non-slip floor tiles should be used on the ground, and aluminum plates should be used on the ceiling to avoid wooden materials. Water inlet and outlet, stairs, etc. shall be made of stainless steel.