First, why should the ceramic tile background wall be sewn?
In addition to thermal expansion and cold contraction, the most important thing is that the seam leaving effect is more perfect. Among them, the best effect is the diamond seam paving of ceramic tiles. There are two methods for diamond paving, one is to process the ceramic tile into a 45-degree chamfer, and the other is to put a plastic cross card to leave a seam.
1, ceramic tile chamfer diamond seam paving
The tiles are machined at a 45-degree angle, and the common point is that the tiles are chamfered. In this way, when laying tiles, there is no need to put plastic cross cards to leave seams. As long as the tiles are laid directly, gaps naturally exist. After the cracks are left in the ceramic tile background wall, it is still necessary to make beautiful cracks to beautify the ceramic tile background wall and make the effect of the ceramic tile background wall better. Otherwise, these cracks may become a place to shelter evil people and shelter evil practices.
2, the plastic cross card seam shop is stuck.
As long as the background wall is made of 300*300 tiles, the paving is relatively simple. When laying tiles, use a 3mm plastic cross card and put it in the gap of the tiles. At the four corners of the background wall, these tiles will be processed into triangles, so that the four corners are symmetrical.
3. The seamless paving effect of background wall tiles is poor.
If there is no seam in the tile background wall, don't use the tile as the background wall. There is no seam in the background wall brick, which is really ugly and has no layering, not to mention the effect. Generally, only stone background wall or white jade material is used, and the seamless paving effect is better.
Matters needing attention before laying ceramic tile background wall:
Second, the ceramic tile background wall paving matters needing attention
1. Before paving, be sure to find an empty place to splice the pattern according to the bottom number of the brick.
2. Before and after unpacking, the product should be placed vertically, not horizontally.
3. Unpack the package, and be careful not to let the corner of the brick scratch the pattern on the surface of other bricks when moving the single piece.
4. Try to avoid the friction between two bricks when moving a single piece, although the surface is coated with protective film.
5. Before paving, according to the specific paving method and adhesive requirements, check the firmness of the wall, and knock it out for reinforcement if it does not meet the strength requirements.
6. Do not tear off the protective film before installation.
7. In order to avoid scratching brick lines, when gluing the back of the product, the front of the product should be placed on soft materials such as foam, paper cover or cloth for operation.
8. When the product needs to be hit during paving, it needs to be padded on the surface with wooden boards, and it is not allowed to directly hit the brick surface with paving tools.
9. Don't use too much force when sewing, so as not to scratch the product picture.
10. It is recommended not to uncover the protective film after all paving is completed, and then completely tear off the protective film after the whole space is cleaned.
1 1. When tearing off the protective film, first slowly pull up the protective film on four sides, and then slowly tear off the protective film from any side. In the process of tearing, instantaneous and local force is not allowed to be used, so as to avoid uneven force and stick the pattern protection layer to the surface of the product.
When the ceramic tile background wall is laid, leaving seams can ensure the overall beauty, and it can also be waterproof and antifouling. Please refer to the above contents if there is a demand for laying ceramic tile background wall.