Why is Baojun 5 10 warm air not hot?

It may be that the adjusting mechanism of the warm air is not working well, which affects the warm air of the car. Or the engine cooling system caused by the car warm air is not hot. The method of identification is simple. Look at the two inlet pipes of the warm air small water tank. If the two pipes are basically hot enough, it means that it is a problem with the air volume adjustment mechanism. On the contrary, if the two pipes are basically cold, or one is hot and the other is cold, it is a problem with the cooling system. The engine cooling system may cause the automobile warm air not to be hot, which may be the problem of the cooling system. Baojun 5 10 air conditioner heating, the method of turning on the warm air is as follows: first turn on the air conditioner switch, turn off the a/c key, and then turn on the warm air by raising the temperature. After the car starts, after about 8- 15 minutes, the water temperature rises to normal temperature, and the warm air can be turned on at this time. (that is, when the water temperature rises to the middle), the circulation mode of the air conditioner is adjusted to the in-vehicle circulation mode. Some cars are in the red area, and some cars use the sun to signal not to turn on the air conditioner (don't turn on the AC switch), because the warm air uses the thermal cycle of the car itself to save energy! Adjust the gear of the air conditioner blower to the appropriate gear, and adjust the wind direction of the air outlet (the direction of warm air blowing is generally forward and under the feet). Million car subsidy.