The first step is to turn off the car engine to prevent injury.
Step 2: After turning off the car engine, find the hood switch beside the cab door and pull it on.
Step 3, after opening the front cover, find the battery of the car in the engine room.
Step 4, then disconnect the negative wire of the automobile battery to prevent electric shock during installation.
Step 5: After cutting off the battery, remove the plastic cover outside the belt on one side of the engine, as shown below.
Step 6: After removing the plastic cover, remove the generator assembly.
Step 7, after removing the engine assembly, you will find that there is a water pipe below, and remove it.
Step 8: Because there is water in the water pipe, antifreeze will gush out after the sewer pipe is removed. Please be careful not to burn it.
Step 9: After the water flows out, you can clearly see the thermostat directly, which means that all the water in the water tank is released.
Extended data:
Daily maintenance of automobile water tank;
1, radiator should not be in contact with any acid, alkali or other corrosive substances.
2. It is recommended to use soft water and soften hard water before use to avoid internal blockage and scaling of radiator.
3. When using antifreeze, in order to avoid radiator corrosion, please be sure to use long-term antirust antifreeze produced by regular manufacturers and in line with national standards.
4, in the process of installing the radiator, please don't damage the radiator belt (film) and hit the radiator, to ensure the heat dissipation ability and sealing.
5. When the radiator is completely drained before adding water, turn on the drain switch of the engine cylinder first, and then turn it off when there is water flowing out to avoid blisters.
6, in daily use should always check the water level, stop using water after cooling. When adding water, slowly open the water tank cover, and the operator's body should be as far away from the water inlet as possible to prevent high-pressure steam from spraying from the water inlet and causing burns.
7. In winter, in order to prevent the core from being damaged due to freezing, such as parking for a long time or indirectly, all the water should be drained with the water tank cover and the drain switch.
8. The effective environment of standby radiator should be kept ventilated and dry.
Baidu encyclopedia-automobile water tank