How to turn on the car heating?
1. After the car is started, after about 8- 15 minutes, the water temperature rises to normal temperature, and the warm air can be turned on at this time. (that is, when the water temperature rises to the middle)
2. Adjust the circulation mode of the air conditioner to in-vehicle circulation.
3. Adjust the heating mode
Switch to warm air mode, some cars are red areas, and some cars are representatives of the sun.
4. Turn off the AC switch.
Don't turn on the air conditioner (don't turn on the AC switch), because the warm air uses the thermal cycle of the car itself to save energy!
Step 5 Adjust the wind speed
Adjust the air conditioning gear to suit the gear, and adjust the wind direction of the air outlet.
Step 6 adjust the mode
The direction of warm wind blowing is generally forward and underfoot blowing, while cold wind blowing is generally forward blowing.
How to turn on the warm air in the car air conditioner?
In fact, we see that the automatic air conditioner has an "automatic" button more than the manual air conditioner, so what kind of temperature is needed? We only need to control the temperature adjustment knob, then set a temperature you need, and press the "Automatic" button, and the control unit of the automatic air conditioner will automatically calculate the most suitable temperature ratio, air supply mode, air volume and so on according to the feedback from the temperature sensor inside/outside the car. And quickly reach the temperature you set.
The intelligent and economical automatic air conditioner makes many car owners who are used to manual air conditioning very unpopular. For example, the automatic air conditioner is turned on with the default maximum air volume, which makes them uncomfortable to blow, and the sound is still very loud. Finally, it is necessary to manually adjust the air volume. But the advantages of automatic air conditioning are obvious, neither too cold nor too hot; The simple operation panel makes it look more advanced.
How to Use Car Warm Air Correctly
It is not advisable to turn on the warm air as soon as you get on the bus.
Because the water tank is still cold at this time, turning on the heating will not only slow down the temperature rise, but also increase the burden on the engine.
The correct way is to start preheating first and then turn on the warm air after the temperature pointer reaches the middle position. At the same time, set the air circulation to external circulation, wait for 2 to 3 minutes, and then set the air circulation to internal circulation after the cold air in the car is discharged from the car.
Does it take gas to turn on the heater?
When the cooling system of the engine radiates heat to the engine, heat is introduced into the car through a small fan to form heating. Even if the hot air port is closed, the heat will be dissipated to the outside of the car, so car heating belongs to waste utilization and will not increase fuel consumption.
Air-conditioning refrigeration consumes oil because the air-conditioning compressor needs to be driven by the engine during refrigeration, and the work of the compressor needs to consume the energy of the engine, thus generating additional oil consumption.
Matters needing attention when turning on the heating.
1, don't sleep in the car.
Like the principle of turning on cold air, if the fuel is not completely burned when the engine is working, it will produce high concentration of carbon monoxide. When the car is driving, the air inside the car can be convectively replaced by air conditioning equipment, so the concentration of carbon monoxide is very low.
However, if the car stops, the heating is turned on and the windows are closed, high concentration of carbon monoxide will enter the car, and people will easily be poisoned and suffocated when sleeping in the car.
Don't smoke in the car.
In the case of heating, the car is a closed space, at this time it is easy to produce bacteria. Smoking in the car is inherently harmful to health, and both first-hand and second-hand smoke have been smoked.
Moreover, amine and nicotine in the flue gas will adhere to the surface of the evaporator. When the air conditioner is not commonly used and it is rainy, bacteria will spread on the evaporator surface, which will cause vehicle air pollution when the air conditioner is turned on again.