Can a real stone paint wall be putty? Can a real stone paint wall be putty? The real stone paint wall can be putty. During construction, immediately soak in water 15 minutes, but the ratio is about 1 2: putty, and then drill holes after stirring. As a scraper, the main purpose of installing underground slurry on the working face is to make the initial batch number too much, leaving no cross marks and making the surface smooth and flat. Coarse frosted paper, swept for about 3mm, passed for the first time. After placing, the main purpose of the substrate surface is to level off the smoothness until it passes through the inlay thickness after being completely dried. After drying, carefully coat the internal latex paint with fine sandpaper and sandpaper. Considering the smoothing effect, when the putty is dried to 6-7% at the end of the second pass, flat calendering must be adopted.
How to choose real stone paint 1? The stone paint on the outer wall has many effects. You can use different colors of sand to create effect colors. When selecting the effect of exterior wall real stone paint, the effect should be selected according to the nature and design style of the building. If you are a high-rise building, you will get the outer wall of Dabei City, and the pollution of paint dust will seriously affect your success. You can choose something with strong adhesion, such as luxurious and solemn buildings. You have dark brown lacquer wood around here. Do you want to show that a real stone paint wall can scrape putty? You can choose the application system to prevent the white and bright color of the external wall thermal insulation coating. You need to choose products with good pollution resistance and use putty for external walls. The primer with good adhesion is real, in order to avoid the appearance of stones.
2. Stone, when you buy it, you should be able to estimate that the external wall is a good amount of paint, but with a good plan, can the stone paint wall really be putty because it has created a natural mineral sand? 2. It is inevitable that there will be a little color difference between stones, and the same batch of products will be painted on the same wall to prevent the color difference caused by the mixing of various layouts, thus affecting the decorative effect.
3. Use different sizes of sand to mix colors to draw the appearance. If the exterior wall coating is not properly prepared, and the particle size and granularity of sand particles are too large, splashing will easily cause spraying rebound. Secondly, in an incorrect structure, such as a gun with such a large caliber, the total pressure is too high and the viscosity is too low, so external paint and too much water will cause sand splashing, which contributes to an important cause of sand splashing.
Through the above article, I learned that the wall with real stone paint can be putty.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~