This is how you should choose the feng shui of a factory building
This is how you should choose the feng shui of a factory building. The location and orientation of the kitchen have a lot of emphasis on feng shui. Feng shui is related to the fortune of a family and also to personal wealth. There are many taboos in Feng Shui that you must pay attention to. Sometimes you have to believe in Feng Shui. This is also an unexplainable metaphysics. In order for everyone to make a fortune, here are some relevant articles about factory Feng Shui. How to choose factory feng shui 1
How to choose factory feng shui
Factory feng shui includes two types; one is for renting factories, and the other is for self-built factories. In addition to the geographical location and Feng Shui environment of the factory, those who rent a factory must also consider the Feng Shui layout of the entire park and the location of the rented factory in the park. Most of the factories built in industrial parks are now facing the same mountain and in the same direction. Some parks were built without hiring a Feng Shui master to survey them, and the situation ended in decline. The manufacturers that moved in had difficulties in development or went bankrupt, and some eventually rented them out to others as temporary warehouses. Therefore, before renting and moving in, you need to know the layout of the park and factory and the fortune. The factors that should be considered when choosing a factory address mainly include the following aspects.
1. The geographical location and environment of the factory location
Location orientation: The factory is located on a mountain, with support, and facing the stars. It has energy and is a prosperous mountain. Xiang, the factory can have a prosperous population and abundant financial resources. That is to say, there is high ground behind the factory, or there are buildings. There is water (river, road, etc.) in the direction of the factory gate. It is relatively open, low and flat, or it is a parking lot, park, square, etc. It is a bright hall and a good way to make money.
1. The factory site is located in an urban area; this type of factory is suitable for high-tech industries that are technology- and capital-intensive, have small land areas, and have no noise, air, or water pollution. The advantages are: very convenient transportation, good information, easy introduction of talents, low transportation costs, etc. Disadvantages are: high land and labor costs, many restrictions, and easy relocation due to urban planning and other reasons.
2. Choose a factory site in the suburbs; this type of factory site has the strongest applicability and has various advantages of a downtown site. It is also suitable for labor-intensive enterprises, and the land cost and labor cost are also low, and there are restrictions. Relatively few, making it an ideal factory location.
3. The factory site should be chosen in the countryside; there are many conditions for this type of factory site, including being far away from the city, docks, train stations, as well as roads, water supply, and power supply, which should be analyzed separately. This type of factory is suitable for labor-intensive, polluting industries. The advantages are: low land cost, low labor cost, close to raw material production, low quality requirements for workers, and easy recruitment. There are also many disadvantages: high sales and transportation costs, small amount of information, poor traffic conditions, frequent water and power outages, etc.
Factory Feng Shui should be chosen in this way 2
The internal layout of the factory should be reasonable:
1. The office building should be in the most beautiful or prosperous position of the entire factory ( Anger＼Prolongation＼Heavenly Medical Position).
2. The layout of the office should be more particular. The boss’s office should be in a prosperous position and should be large. The offices of the vice president and chief officer should be divided into two sides, which should be slightly smaller. They should be left and right, and the financial office should be in the office. In terms of financial position, it is best for the window to accept foreign money. The offices of secretaries and technicians should be in the Wenchang position, the security personnel should be in the killing position, and other conference rooms, reception rooms, etc. should also be careful.
3. The door of the production workshop should be opened in a prosperous position, and the important indoor machinery should be placed in a prosperous position, which is an auspicious position for heavenly medicine. The workshop office must be located in the workshop.
4. The employee dormitories should be lower than the factory building, and the layout of living facilities such as canteens should also be reasonable. The bathroom should be placed in the most dangerous position of the factory, to suppress the evil position, so as to ensure safety, good economic benefits, and fewer accidents in the factory.
5. The greening of factory buildings, fortune fountains, rockeries, road distribution, etc. must pay attention to Feng Shui layout.
The factory is an important place for generating wealth. If you want to have prosperous wealth and prosperity, you must find a geomantic treasure place with an environment that both prospers the owner and gathers Qi. From the perspective of Feng Shui, the color inside the factory should be combined with the five elements of the factory owner's fate, the seating orientation of the factory, and the five elements of the products produced. When choosing a factory site, we should pay attention to the openness of the factory and accept the vitality from all directions, which is consistent with the emphasis on welcoming visitors from all directions in business. According to this principle, when choosing the location of the factory, you should also consider the openness directly in front of the factory. It is required that there should be no obstructions, such as fences, telephone poles, billboards, overly large trees, etc.
Pay attention to the openness in front of the factory door, so that the factory can face all directions, which not only broadens the factory's field of vision, but also allows customers in the distance to see the factory, so that the product information operated by the factory can be spread. Feng Shui calls this transmission of information the flow of Qi. With the flow of Qi, there is vitality! From a business perspective, customers and pedestrians may come to place orders after receiving the product information from the factory.