When everyone returns home, the main place they go to rest is the bedroom. Whether the bed in the bedroom is stable or not is closely related to the quality of sleep. In some families, the stability of the bed is relatively low. Poor, so you must find a way to solve it in time when you have time. How to reinforce the shaking of the bed head? What are the Feng Shui requirements for the orientation of the head of the bed?
When everyone returns home, the main place they go to rest is the bedroom. Whether the bed in the bedroom is stable is closely related to the quality of sleep. In some families, the stability of the bed is relatively low. Poor, so you must find a way to solve it in time when you have time. Otherwise, it will not only affect your sleep, but also the shaking of the bed head. How to strengthen it? What are the requirements for the orientation of the head of the bed?
How to reinforce the shaking bed head?
Add a few legs to the middle of the bed, and the stress on the sides will be greatly reduced, and then the wooden bed will be more stable, which is very convenient. When reinforcing, be careful to find the right position, otherwise it will Ineffective.
1. Wall-based method: If the bed is movable, try to move the upper and lower beds to the wall and as close to the wall as possible, which can alleviate the shaking problem of the bed frame caused by design defects or poor quality. , if necessary, you can add spacers (book, wooden board, etc.) at the bottom of the bed frame column to adjust the gap to further improve the anti-sway quality.
2. Fixing method: If conditions permit, use U-shaped buckles to fix the three wall-mounted columns in the bed frame to the wall. First, use an electric drill to drill holes in the wall and install the expansion screws. , and then fasten the U-shaped buckle to the column and fix it on the wall to achieve a fixed effect. (Investigate in advance whether the school allows drilling holes in the wall, and try not to violate school regulations).
3. Bedside anti-movement method: tb search for bedside anti-movement, buy it and clamp it in the gap between the upper and lower bed frames and the wall. The principle is to stop and prevent shaking. But this method is not suitable for round tube bed frames.
What should be paid attention to in the direction of the head of the bed?
1. The bed should not be facing the door, or the bedside should not be close to the door. Such a placement has no privacy or security at all, and will also greatly affect rest. If the doors collide, you can choose to use a screen to block the door, which avoids the collision and maintains the privacy of the bedroom.
2. The bed should be placed so that the sleeper can see the door and window of the bedroom from the bed. It would be better if there is light shining on the bed during the day, which will help the human body absorb the energy of nature.
3. Avoid facing the west of your bed. According to modern scientific explanations, the earth rotates from west to east. Heading to the west will cause blood to often rush straight to the top of the head, making sleep very unstable; the TV should not be facing directly. When getting into bed, the bed should not be backed up by the door. Standing outside the door will give you a clear view of the bed, making you feel insecure and affecting your rest.
4. Avoid using beams to press the bed. This will cause a sense of depression all the time and affect people's physical and mental health.
5. The head of the bed should be upright and not upright. The headboard should be against the wall, not against the window. If the bed cannot be against the wall, there must be a headboard, so that it will not hurt the head. Suspended, it is also important to note that there should not be a toilet or kitchen behind the head of the bed.
6. As for the bed itself, what needs to be considered is whether its length and width are sufficient, whether the bed body is flat enough, and whether the support and comfort meet the needs. The height of the bed is generally slightly higher than the sleeper's knees. It is also important to note that the bed should not be close to the floor, and the bottom of the bed should be kept well ventilated, otherwise it will easily become damp and cause back pain.
The above content mainly describes how I can reinforce the shaking of the bed head? What are the details of the orientation of the head of the bed? There are not many reasons why the head of the bed is shaking. Therefore, it is not difficult to solve this problem. The most practical and basic method is to connect some items to each other. If you have more money, If you have enough, you can also buy some anti-sway reinforcement equipment. The use effect of this type of equipment is very good.