How to disassemble the modern Santa Fe 2.7 water tank?

Hyundai Santa Fe removed the wire harness clip in the upper cross beam of the water tank and removed the wire harness. When the cover is opened, the buckle on the outer bumper of the water tank frame is removed. Just break the water tank, take it out and fix it with two T30 screws.

The cooling system of automobile water tank can radiate the redundant and useless heat of the engine, so that the engine can work normally at various speeds or driving conditions. Automobile water tank is a heat exchanger of water-cooled engine, which maintains the normal working temperature of the engine through air convection cooling. Be sure to pay attention to whether the pointer of the engine cooling water thermometer on the instrument panel is normal.

brief introduction

From the appearance, 20 10 modern Santa Fe has undergone many improvements and many details have changed. The front bumper and headlights are slightly lifted from the rear, which is more imposing and the side lines of the car body are more beautiful. Santa Fe is not as bloated as it used to be, but more robust. In terms of power, Santa Fe has also been upgraded.

The latest 2.4-liter DOHC four-cylinder gasoline direct injection engine is adopted, with the highest output of 175 horsepower. This engine will become the standard configuration of the Santa Fe GSL series, equipped with a 6-speed manual transmission and 17-inch wheels. The new Santa Fe will become more flexible and easy to control. If this 2.4-liter engine is not strong enough, there is a 3.5-liter DOHC Lambda II V6 engine waiting for you.

The maximum output power is 276 HP, which will be the standard configuration of Santa Fe SE series, equipped with modern 6-speed SHIFTRONIC automatic transmission and 18-inch wheels. In terms of fuel consumption, according to modern measurement data, it is 100 kilometers 10.2 liter, but for a body as big as Santa Fe, the performance is acceptable.