Installation height of faucet
1 Generally speaking, the upper edge of the bathtub should not exceed 500 mm from the ground. The faucet mouth of the bathtub should be facing the center of the bathtub drain, and the height is 120- 180mm from the upper edge of the bathtub.
2. The height of the washbasin or washbasin from the ground (from the basin edge) is 780-820mm, which is convenient to use. Generally speaking, the cold water pipe is on the right and the hot water pipe is on the left.
3、? The shower head is generally fixed in the middle above the bathtub or shower screen, and the height is about 2 meters from the bottom of the bathtub.
Installation skills of faucet
Different faucets have different installation methods. The following are some common installation tips for faucets. Let's have a look.
1. Installation of single-hole basin faucet
Pay attention to the diameter of the water outlet when paying the bill. At present, most of the water on the market is hard pipe. Pay attention to the height of the water pipe, about 30 meters down from the basin.
When installing, you must choose a special angle valve and fix it with the hot and cold water pipes on the wall. If there is a distance between the angle valve and the faucet water pipe, you need to buy a special pipe to extend the connection. You can't connect with other water pipes, otherwise it will leak and fall off because of the high water pressure. If the inlet pipe is too long to exceed the outlet pipe,
Only cut the excess. 2. Installation of single-hole kitchen faucet
Because the kitchen faucet is used frequently, and it is easy to loosen when moving around, it is natural to require everything to be stable, so the lock nut must be tightened. At present, there are a number of threaded pipes with enlarged nuts in the building materials market, which have a good stabilizing effect. The obvious effect will become the trend of a generation of trends.
3. Installation of thermostatic faucet
Before installing the thermostatic faucet, check which side of the water pipe is cold water and which side is hot water, especially connect the hot and cold water pipes by mistake, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use constant temperature faucets, mainly because the water pressure is too low. Install constant temperature faucet and install cold and hot water filter.
4. Install shower and bathtub faucet
If you buy a shower, bathtub or faucet on the wall, you need to choose a suitable height to bury the outlet pipe. The distance between hot and cold water pipes is about 20 or more.
Flush the water pipe before installation to avoid damaging the faucet due to hard water quality. Hidden shower and bathtub faucet: After purchasing the hidden faucet, the valve core of the faucet should be embedded in the wall. The thickness of the bathroom wall should be considered before embedding. If the wall is too thin, the valve core cannot be embedded. Do not take off the plastic protective sleeve of the valve core easily when burying, so as to avoid damaging the valve core by cement and other sundries when burying. In addition, when you bury the valve core, you should also pay attention to the up, down, left and right directions of the valve core to avoid burying the valve core wrong.
These are the installation heights of faucets and the installation skills of different types of faucets. I hope it works for you.