Non-standard door customization must provide data.
When making non-standard doors, we should provide manufacturers with the size of each door opening, the opening direction of the door body and even the customization of the style, which basically needs to be done according to the environment! These situations increase the cost of materials and labor, which is why non-standard doors are usually more expensive than standard doors.
Usually the biggest headache for manufacturers is that when customers customize non-standard doors, the actual area is smaller than our standard doors, but our quotation is higher than our standard doors. It is difficult to explain at this time, because customers think we are fooling them. In fact, they haven't considered the increase in labor costs! For example, many users require on-site measurement, and the styles they provide are more complicated! At present, the labor cost is far greater than the material cost!
Matters needing attention in customizing non-standard door size
1. At present, the width of non-standard doorways in our market is about 2 1002380, and the height of doorways is about 27202900. In order to ensure the smoothness, atmosphere, practicality, basic proportion and overall beauty of the doorway, please pay attention to the above dimensions as much as possible when retaining the doorway or rebuilding the doorway of the old house. (What should be paid attention to when rebuilding the door opening for customers who have rebuilt the old house but have not removed the old door)
2. The decorative effect of the copper-like luxury door cover is more atmospheric, beautiful and luxurious. Many customers choose it at present. If the installation site permits, you can consider choosing.
According to folk customs and geomantic omen, the grade of the back door is generally about 5 points higher than that of the front door. Pay attention to these when copying horizontal lines.
4. When you need to measure the size of the doorway at home after signing a contract with the customer, you must make it clear to the customer that 5- 12 can ensure that the size measurement can be carried out quickly and accurately.
5. The horizontal line must be copied accurately. The determination of horizontal line should be negotiated with bricklayer before measurement. It should be determined according to the overall height inside and outside the house, the thickness of the floor tiles ordered, and the levelness and flatness of the original ground in the house. Water pipes or laser levels shall be used for accurate measurement and marked conspicuously.
6. Both the outer wall and the inner wall have been brushed once, and the thickness is basically uniform. First, determine how to decorate the external wall: dry hanging marble (total thickness of 6 cm). Note (the total thickness includes the thickness of the surface layer and the filler added during construction); Wet hanging marble (total thickness 4*** points); Ordinary exterior wall brick (with a total thickness of 2.5 cm), in the above three cases, the door must be bricked before installation. The latter is a special case, and it is necessary to install the door first and then stick the brick (the above is the case when the base surface is uneven, if the outer wall is uneven, it should be thickened with powder ash, and the actual measurement will be subject to the bricklayer's).
7. There are generally four kinds of interior wall decoration: dry hanging marble (with a total thickness of 6 cm); Wet hanging marble (total thickness 4 cm); Ordinary interior wall brick (total thickness 2.5 cm); Or just paint (the total thickness of ordinary putty ash plus paint layer is generally 0.8 cm). Doors must be installed before the interior wall construction (the above are in the base surface, and if the interior wall is uneven, it should be thickened with powder ash, and the actual measurement will be subject to the bricklayer's master).
8. Please consult the designers, constructors and their families before determining the decoration construction scheme and materials, and don't change them easily after determining. Especially after our company completes the measurement, otherwise the installation effect can not be guaranteed (the customer will bear the expenses arising from the installation of accessories or construction remedial measures). Under normal circumstances, when customers want to change the construction method of internal and external walls, they must inform our business personnel to re-determine the depth dimension within 24 hours after the measurement is completed.
9. If the external wall is not hemp brick, the wall brick must be pasted before the installation of the non-standard door, and the shop is stuck as comprehensively as possible. The maximum allowable distance from the outer edge of the deep edge of the doorway wall to the upper, left and right edges of the brick is 3 cm (to ensure the effect of flat package fastening on the wall); In addition, when the imitation copper door cover is installed, the maximum allowable distance from the outer edge of the deep edge of the door opening wall to the upper, left and right edges of the brick-sticking part is 18 cm (to ensure the effect of flat package fastening on the wall).
65438+
1 1. When there is a copper-like luxury door cover configuration, it is necessary to ensure that the edge size from the ceiling plane to the top of the door opening is greater than 36 cm after construction. Ceiling construction must be carried out after the installation of imitation copper door cover. The best distance between the top of the imitation copper door cover and the ceiling is between 5 10 cm. Pay attention to this size when hanging the ceiling. (Too small a distance is more depressing and compact, and too large a distance is more empty and incoherent. In addition, when the size of the window cover exceeds 10 cm, please inform our business personnel that this will not be suitable for ordinary edging, and it is necessary to use imitation copper door covers to ensure the effect.
12. The clear height of the window sash with the same door on the external wall must be determined after the installation of the non-standard door ("the window depends on the door"), so as to ensure that the sill height of the door frame and the sill height of the window sash are in a parallel straight line (and the highest point of the door leaf and the highest point of the window sash are in a straight line), so that the overall effect is harmonious and beautiful. Prevent the height difference between the door leaf and the window sash from being too large, which will seriously affect the decorative effect of the entire building exterior wall. If the door and window need to be constructed at the same time because of the construction progress, please ask the manufacturer of the window to call the manufacturer of the non-standard door when determining the height of the sash.