How to clean the blocked heater water tank?

The warm air tank is blocked, so you can blow it with a high-pressure air gun to see if it can be delivered well. Remove two pipes from the hot air tap water pipe, and then connect them to the top of the hot air tank for air blowing. Although this method is relatively simple, only the water tank used for storage will be blocked due to sludge softening. On weekdays, it is recommended that the owner clean the heater tank on time. If it is broken, it must be replaced with a new heater tank, probably around 500 yuan.

In addition, the owner can also find a car wash shop, and then ask the maintenance man to remove the inlet and outlet of the warm water tank of the car, and then use the high-pressure water gun of the car wash shop to clean it back and forth, and then wait until the cleaned water becomes cold water. Moreover, if there is a special detergent, the original antifreeze of the car can be discharged, then cleaned with the detergent, and then a new antifreeze can be added after cleaning.

Attachment: Daily cleaning method of warm air water tank

1. Prepare cleaning agent for water storage tank, antifreeze, rubber gloves and crucian needle nose pliers. Open the buckle of the sewer pipe with crucian needle-nosed pliers, then twist the water inlet of the warm air tank, and peel off the pipe after the buckle is opened.

2. Insert the nozzle of the high-pressure air pump into the water inlet of the heater box, and then turn on the air pump. High-pressure air will be blown into all channels of the circulation system, including the pipes of the warm air tank. With the entry of high-pressure air, the remaining turbid water in the main cylinder will also be blown out.

3. Add cleaning agent, then fill the water storage tank with oily drinking water, start the car for 30 minutes and turn on the warm air. This circulating system drains water three times. Before changing the water in the fish tank, high-pressure air should be used to dredge the pipeline. Every ten minutes, the color of the discharged water becomes clear, and finally antifreeze can be added.