The floor heating water separator is the control center of the whole indoor geothermal heating. It has the functions of shunt and partial pressure. When the heat medium flows into the room, it enters the main rod of the water separator after passing through the multifunctional filter. In this link, the filter filters out impurities in the heat medium to prevent impurities from entering the underground pipe network and blocking the pipeline. The main pole is installed horizontally, using the principle of equal height and equal pressure;
So that the heat medium is evenly distributed in the branch pipes, and after passing through the heat exchange system, each branch pipe flows back to the water collecting main pipe, and then flows into the heating system through the water return port. In addition, the water mixing device is added in the self-heating system, that is to say, after heat exchange, the temperature of the heat medium (water) is still very high, and after passing through the water mixing system, it flows into the main rod of the water separator to continue circulating, thus saving energy while heating.
Extended data:
Classification of floor heating water separator:
1, basic type: composed of water diversion main pipe and water collection main pipe. A ball valve is installed on each branch of the diversity water main pipe, and manual exhaust valves are installed on the diversity water main pipe respectively. The basic water separator does not have the function of flow regulation.
2. Standard type: The structure of the standard water collector is the same as the basic type, except that the ball valve on the main pipe is replaced by a flow control valve. Replace the manual exhaust valves on the two main pipes with automatic exhaust valves. The standard water collector can accurately adjust the flow of each loop, and even the flow adjustment of luxury standard water collector can realize artificial intelligence adjustment.
3. Functional type: In addition to all the functions of the standard water collector, the functional water collector also has the functions of temperature and pressure display, automatic flow adjustment, automatic water mixing heat exchange, thermal energy metering, automatic indoor temperature control, wireless and remote control, etc. In order to prevent corrosion, water collectors are generally made of corrosion-resistant metals or synthetic materials.
Commonly used materials are copper, stainless steel, copper-nickel plating, alloy nickel plating, high temperature resistant plastics and so on. The inner and outer surfaces of the water collector (including connectors, etc. ) should be smooth, no cracks, sand holes, cold insulation, slag inclusion and uneven surface. The connector with electroplated surface shall be uniform in color, firm in coating and free from deplating defects.
Baidu encyclopedia-floor heating water separator
Baidu encyclopedia-water separator