High-quality plate manufacturing:
The high-quality board building adopts plate structure, so that the elevator and corridor are located in the rear facade and the daily transfer is located in the living room. The typical design is one staircase with two households. When facing north and south, there is plenty of sunrise in the front living room and master bedroom. In the east-west direction, there is a half-day sunrise in the front and rear rooms. In the organization of the room type, it is conducive to the straight-line flow of the wind as much as possible and always keeps the air fresh. At the same time, it also emphasizes the independence of residents, avoids the mutual vision caused by too many bumps between residents and too close windows, and ensures privacy well. The specific quality is also reflected in:
(1) Controls the ratio of width to depth.
The development of banlou experienced a long period in 1980s, and in recent years it has gradually transformed into a pure banlou with high comfort. The former has obvious shortcomings because there are few elevators, but the latter is one elevator and two households, and it ensures a certain width to make the sun full, and at the same time, it more perfectly configures various functional areas. With the development of housing, a short board building with only two or three doorways began to appear. It not only maintains the advantages of a pure board building, but also overcomes the shortcomings of monotonous garden planning and barracks layout. Slots are added to the building, forming a bright bathroom and a bright restaurant, which effectively improves the comfort.
Therefore, we should try to choose the apartment with short depth and large width. Generally speaking, the low-rise slab depth is controlled within 14m, the high-rise slab depth is controlled within 18m, and some units exceed 20m. If you don't rely on the lighting on both sides of the board building, choose carefully as far as possible, because too much depth will increase the indoor gray space and affect the living comfort. The area width depends on the size of the apartment. Generally, the type of banlou is more than two bedrooms, with the width of two bedrooms ranging from 6m to 8m, three bedrooms ranging from18m to13m, and four bedrooms ranging from12m to15m.
(2) Pay attention to the sunshine in the bedroom and living room.
In the design, it is important to consider the strict distinction between the location of the room and the auxiliary room, and the separation of static and dynamic, which is the advantage of the board building. In terms of apartment spacing, the entrance is the hall or porch, and the dining room is adjacent to the kitchen and placed on the back side. The living room and master bedroom are located on the Chaoyang surface. At the end of the corridor is the master bedroom.
In terms of orientation, the north-south orientation of the apartment is generally "two-bedroom, with the master bedroom and living room facing south, or two-bedroom facing south and living room facing north;" Three bedrooms, master bedroom, one secondary bedroom or study and living room facing south, or master bedroom and living room facing south, the other two secondary bedrooms facing north, or three bedrooms facing south and living room facing north; Four-bedroom, three-bedroom and living room face south, or two-bedroom and living room face south, or three-bedroom faces south and living room faces north. As the east-west direction of the banlou, the east side is the main direction, and other laws are the same as the north-south direction.
The biggest advantage of banlou is that the apartment is regular, with small mutual vision and good ventilation and sunshine. Therefore, try to choose straight plate buildings, and U-shaped and Z-shaped plate buildings should be carefully considered according to sunshine and mutual viewing. However, the small number of units is also the disadvantage of the board building.