1. Can the toilet be moved?
There may be many people who want to move the toilet for various reasons. Usually it may be because the location of the toilet affects Feng Shui, the toilet is facing the door, or the toilet space is too small and the toilet location is unreasonable. Can the toilet shift? Yes, you can.
1, using toilet shifter
Disadvantages: however, the short distance affects the launch;
Change toilets.
If you want to move further (beyond the scope of the special toilet shifter), you must raise the bathroom floor and add a trap at the same time as the pipeline to prevent the odor from flowing back. Because the diameter of the drainage pipe is generally 1 10MM, the ground should be raised at least 120MM, leaving room for cement mortar and sewer slope.
In addition to considering the blockage problem, we should also pay attention to the tightness of the pipeline when moving the toilet. This is what experts have repeatedly reminded owners, especially the interfaces between different pipelines. It is necessary to check whether there are leaks many times to make sure there are no leaks, sealing rings, glass glue and so on.
There are several sewer pipes in the bathroom. Don't move if you can! Go and change the toilet. The projects he has done are generally to change the toilet to 10 cm or so and use a special toilet shifter (shaped like two staggered elbows). Because the movement is not very big, it is unlikely to get stuck. If you want to move further, there is no shifter to use, you can only do the sewer. He said they don't usually do this because the elbow joint is more difficult to deal with.
The toilet is also chiseled out, all waterproof. When I tried to install the toilet, I found a new problem. The surface of the displacer is wider than the toilet base.
At present, the bottom of the toilet directly presses on the cover plate of the shifter. On the same plane, because the displaced toilet will turn over water, the toilet base should be breathable, and it is difficult for ceramics and plastics to be permanently sealed firmly. I will focus on the 3 cm deep chisel waterproof again, use 1 10 to take out the mouth directly, lay the floor tile, cover the bottom plate of the shifter, let the bottom of the bucket directly contact with the floor tile, and seal it with glass glue. The mouth is deep and it is not easy to turn over the water. Waterproof strips should also be waterproof before sticking bricks. Moving the toilet like this is foolproof. Under normal circumstances, the toilet displacement is about 100 yuan. 50 floor drains were removed, 200 bricks and bathtubs were removed, wall bricks 180 were added, floor tiles 120 were added, 50 water pipes were removed, and 40 were waterproof. * * Including 890 yuan, I made a single toilet seat waterproof four or five times, and it took three days. It is estimated that it will take at least seven or eight days. At present, the bricklayer's salary is 800 to 1000, about one in two days. Three or four hundred dollars a day, so some jobs can't be done well just for money.
2. Re-drill the hole and move the toilet
Displacement of hidden water tank toilet
Drainage: Interlayer drainage. The main riser is made of polyvinyl chloride.
Reconstruction method: dig a hole in the ground, dig out the original sewer main pipe, connect a new PVC pipe, and change the toilet drain to a new position designated by the customer.
In general, the location of the bathroom designed by the developer is reasonable, mainly for the second-hand houses with small bathrooms, and for those with a moving distance below 15cm, a special shifter is used. /kloc-above 0/5cm, floor elevation should be considered. Just buy a shifter to shift gears. Over 15cm, all toilets are not very easy to use. It usually leads to blockage. If the toilet changes more than 10 cm, it is best to reinstall the pipeline and raise the toilet floor by about 12 cm.
Second, what should I pay attention to when moving the toilet?
According to different situations, the matters needing attention are different. Usually, there are three kinds.
1, using toilet shifter
In this case, the main consideration is whether the toilet pit distance is appropriate. It is necessary to adjust the position of the toilet. Generally, it can move within 10cm, but attention should also be paid to prevent the toilet from blocking. Can I not go? Try not to.
2. Submerged toilets
The changes in toilets are more diversified. This is more convenient. Listen to the opinions of the experts and just change it.
3, change the position of the sewer pipe
This needs to be discussed with the residents downstairs, and the location of the sewer pipe should be changed. Under normal circumstances, making a big bend at the top of the downstairs is much better than using a shifter, and it will basically not be blocked. But after changing the position of the sewer pipe, it must be waterproof again. A closed water test should also be done. Suitable for small distance changes.