Working principle of geothermal water separator
The floor heating water separator is the control center of the whole indoor geothermal heating. It has the functions of shunt and partial pressure. When the heat medium flows into the room, it enters the main rod of the water separator after passing through the multifunctional filter. In this link, the filter filters out impurities in the heat medium to prevent impurities from entering the underground pipe network and blocking the pipeline. The main rod is installed horizontally, and the heat medium is evenly distributed on the branch pipes by using the principle of equal height and equal pressure. After passing through the heat exchange system, each branch pipe flows back to the main pole and then flows into the heating system through the water inlet. In addition, the water mixing device is added in the self-heating system, that is to say, after heat exchange, the temperature of the heat medium (water) is still very high, and after passing through the water mixing system, it flows into the main rod of the water separator to continue circulating, thus saving energy while heating.
Function of floor heating water separator
1 and conditioning temperature. The floor heating water separator is used for diversion. If the whole boiling water flow is large and the circulation is fast, the indoor temperature will be high; If each valve is half open, perhaps a single valve is half open, the amount of hot water in the pipeline will decrease, the water circulation will slow down, and the corresponding indoor temperature will be low; If the hot water is completely turned off, it will not circulate, that is to say, there is no heating in the room, so you can use a good floor heating separator to adjust the indoor temperature.
2. Room heating. When the floor heating system is planned to be installed in a large apartment, the outlet pipe and return pipe will be installed in different areas, and each pair of water pipes corresponds to a water separator. When there is no one in an area for a long time, users can choose to turn off the water separator, so as to achieve the purpose of heating different rooms.
3. Shunt voltage stabilization. The water separator can divert the water in the water pipe to achieve the effect of pressure balance. The inlet and outlet of the water separator have corresponding valves, which can adjust the water flow and achieve the water flow balance.
Introduction to usage
1, the floor heating water separator can control the heating temperature of each room or area in a shunt way, and users can adjust the room temperature according to their own needs; Through the manual exhaust valve of the water separator, the user can exhaust the gas in the pipeline by himself to ensure the heating temperature of each pipeline.
2. There is a filter at the front end of the oil-water separator. During the annual heating period, users will remove the filter screen at the lower end of the filter regularly or irregularly, and then install it after cleaning to ensure the cleanliness of the water pipe. Rinse the pipe network with clean water after heating.
3. When you start heating, you won't feel the temperature immediately. During this period, the indoor concrete floor gradually heats up to store heat energy, and it can reach the design temperature after 2-4 days. If the user heats himself, the water temperature should not exceed 65℃.
4. If you are away from home for a long time, you can use the main valve of the floor heating water separator to reduce the circulating water, and don't turn it off completely. If there is no indoor heating all winter, the water in the pipeline will be blown out.
The above is the introduction of the working principle and usage of the geothermal water separator brought by Bian Xiao. I hope it will help you.