In addition to paying attention to the orientation when placing children's beds, you also need to pay attention to whether the positions of the children's beds and other home spaces are reasonable. These will affect the feng shui of the children's room, so what are the feng shui taboos for placing children's rooms? ? In addition, when choosing furniture for children’s rooms, you cannot ignore it. Some designs and functions must be taken into consideration. Let me introduce them to you below.
Feng Shui taboos when placing children's beds:
1. Do not place children's beds under beams. The beams will press against the top, which will put heavy pressure on the child, making the child prone to nightmares. .
2. The bed should not face a window with too much sunlight, because too much sunlight can easily make people upset.
3. The bed should not be on the balcony, nor should it be close to the floor-to-ceiling windows of the balcony, nor should it be close to the floor-to-ceiling windows of the balcony.
4. Do not place the bedside near the toilet or behind the toilet.
5. If there are more than two children in the family sharing a room, it is not advisable to place their beds in different directions, as this will easily create a gap between them.
6. The bed cannot be placed on the kitchen stove (it is prone to skin diseases and irritability), nor can it be placed on the toilet.
7. The bed should not be placed directly under the shrine in the shrine (it is best not to do so when the child is normal).
Things to note when purchasing children’s room furniture
Design: rounded corners
Function: anti-collision
Children are very active. It is common to run and jump around the room. If you are not careful, you will bump into the corner of the table. If the corner of the table is sharp, it is particularly easy to cause injury. The rounded corners are designed to be smoother, which can reduce collision damage. If parents are not yet at ease, they can also buy a transparent plastic anti-collision fillet, which can be attached to the corner of a table or other places, and is also very practical.
Design: Damper
Function: Anti-pinch
Dampers widely used in wardrobe and drawer doors can allow the cabinet doors to rebound slowly, thus Give the child time to react to the imminent danger of hand pinching. Even if he pulls his hand back, he will not accidentally pinch his little finger because he closed the cabinet too hard.
Design: Aluminum edge replaced with rubber edge
Function: Anti-cut
Many children’s furniture will be decorated with shiny aluminum edges, but metal edges Most of them are sharp, and children's skin is relatively delicate, so their hands may be scratched if they touch them. Today's children's furniture designs are gradually using less aluminum edges, and more are using rubber edges. Some of the metal that serves as a support for the frame has its sharp corners moved inward to minimize the possibility of children touching it.
The placement of furniture is sometimes very particular. You should pay a little more attention to it. That’s all I have introduced. I believe you already have a certain understanding. I hope this article can Help everyone.