The clothes drying rod is best installed in the living room or bedroom. Many people will put the clothes rack in the bedroom, and the clothes rack can be placed on the balcony, next to the window and at the height of the bedroom, which can optimize the feng shui pattern at home. Is it better to install the clothesline in the living room or the bedroom?
It is not the first choice whether the clothes drying rod is installed in the living room or bedroom 1. Clothes poles should be installed in ventilation, kitchen, bathroom, study and other places and secondary positions. Living room. Preferably a balcony
Will not affect the rest of others in this position; Furthermore, it depends on the actual layout: because the laundry time is generally during the rest time, it is recommended to install it on the balcony of the living room. If a housewife rests in a bedroom with a balcony, she will get sunburned. ...
See what you want to satisfy first. If you want to ensure the integrity and aesthetics of the living room, install a bedroom. If you don't care, install the living room.
Installed on the balcony of the living room. If there are more than three clothes, that's fine. If there is a sliding door on the balcony of the living room, you can't see anything. If you hang it in the bedroom, even if the clothes are dehydrated, it is inevitable that there will be no moisture. The clothes rack is very convenient to install in the living room.
1. The bedroom, living room (living room), kitchen and bathroom in each house should meet specific functional requirements.
2. The living room of the house is also called the living room, and the living room is mainly a space for residents to receive guests, entertain and reunite. The bedroom is a space for residents to sleep and rest.
3. Disadvantages of the clothes rack in the bedroom:
1) The clothes rack is easy to use, and the installation position generally matches the position of the washing machine on the balcony; When the washing machine is working or drying clothes, it will inevitably make noise;
2) Two or more generations, it is inconvenient to go in and out of the bedroom to wash clothes and dry clothes;
Is it better to install the clothes rail in the living room or bedroom? Second, most owners install drying racks on the balcony of the living room. Choice, the balcony has a large space and good sunshine, which can dry a lot of clothes and effectively remove bacteria. It is the first choice for clothes hangers.
Bedroom hangers are generally used in bedrooms with balconies to dry some private underwear. Because the bedroom is a private space, guests generally do not enter the bedroom, so the installation of drying racks in the bedroom does not affect the beauty of the living room.
Nowadays, many large-sized houses or villas will build independent clothes drying rooms, and an independent space will be opened in the south to put washing machines and hangers. Clothes can be directly taken out to dry, which effectively utilizes the space and enhances the overall aesthetic effect of the family.
Now that we know where clothes hangers should be installed in home improvement life, do you know the installation method of clothes hangers? First, install hand cranks, and install hand cranks at both ends of the balcony. Measure the position where the hand crank needs to be installed, which is generally 1.2 meters away from the ground, and put the hand crank at the position where it needs to be installed.
Then mark the hole to be punched and fixed with a marker pen, then remove the hand crank, punch the hole with an electric drill, install an expansion rubber plug, and fix and tighten the hand crank; Then shake out all the wire ropes in the crank. When shaking out the wire rope, pull the wire rope to avoid wire disorder until the handle can't turn.
The pulley frame is the four supporting points installed on the ceiling. Double pulley frame is near the corner, and single pulley frame is at the end. Generally, taking a single wheel carrier as an example, the distance between the single wheel carrier and the two side walls should be more than 27 cm, while the distance between two single wheel carriers should be more than 45 cm, while the distance between a single wheel carrier and a double pulley carrier is generally 2M, but the final condition is the installation environment. Mark the installation position, mark the hole position, and then punch holes in the installation hole position.
1. The clothes rack can be placed on the bedroom balcony, which is suitable for drying clothes.
2. Because there are fewer people going to the bedroom balcony, most people are active in the lobby during the day, and drying clothes on the living room balcony may not look good, but the bedroom does not have this concern.
3. The existing washing machines all have the function of air drying/drying clothes, which ensures that the clothes will not wet the balcony and affect the wet room of the bedroom. The bedroom balcony area is not small. If there is enough space, you can consider placing a floor-standing drying rack on the ground, but you need to take waterproof measures.
Is the clothesline installed in the living room or bedroom? 3. Installation position of clothes hanger.
At the top of the balcony to be installed, measure the diameter of the lighting lamp at the top of the balcony with a steel ruler, and then make installation marks on both sides of the lamp (the length depends on the size of the balcony). Then measure the distance between the mark and the balcony edge, and determine the installation width of the top seat according to this distance. Then measure the length of the balcony with the lamp as the center.
According to the length of the clothesline, it is determined that the two sides of the lamp are equally divided into 80 cm- 100 cm, and then there are four intersections at the interval of width measurement. These four intersections are the installation positions of the top seat of the clothes hanger. After the position is determined, drill holes with an electric drill, and then fix the four top seats with expansion screws (if the length of the rod exceeds the normal size, this interval will be adjusted accordingly).
How to install hangers
1. Open the outer package of the lifting hanger and check whether the parts of the hanger are intact. General spare parts include: corner device, fixing cover, lifting ring, hand crank, expansion screw, handle, wire rope, lifting lug and pulley frame.
2. First, install the hand crank, and install the hand crank at both ends of the corridor. Measure the position where the hand crank needs to be installed, which is generally 1.2 meters away from the ground. Place the handle in the position to be installed, then mark the hole position to be punched and fixed with a marker, then remove the handle, punch with an electric drill, install an expansion rubber plug, and fix and tighten the handle. Then shake out all the wire ropes in the crank. When shaking out the wire rope, pull the wire rope to avoid wire disorder until the handle can't turn.
3. Determine the installation position of pulley frame. The pulley frame is the four supporting points installed on the ceiling. Double pulley frame is near the corner, and single pulley frame is at the end. Generally, taking a single pulley frame as an example, the distance between a single pulley frame and two side walls is more than 27 cm, while the distance between two single pulley frames is more than 45 cm, while the distance between a single pulley frame and a double pulley frame is generally 2M, but the final condition is the installation environment. Mark the installation position, mark the hole position, and then punch holes in the installation hole position.
4. After drilling, assemble the expansion screws with four pulley frames respectively.
5. After assembly, install two double pulley frames and two single pulley frames on the drilling hole respectively.
6. Assemble the corner device with expansion screws.
7, determine the installation position of the corner device, the position of the corner device must be perpendicular to the position of the hand crank, 90 degrees.
8. After determining the installation position, mark the hole and install the assembled corner device.
9. Thread the steel wire, disassemble the steel wire, hold one end of the two steel wires in it respectively, and thread them into the corner device first.
Install the fixing cover.
1 1. Install the lifting ring, cut off the four ends of the freshly ground steel wire, then pass through the lifting ring and tighten it.
12. Install the clothesline and fix the four rings on both sides of the two clotheslines.
How to choose a hanger?
1, look at the steel wire
Look at its thickness and elasticity. The thicker and softer the wire rope, the better. The identification method is to fold the wire rope in half and put it aside to see if it can be restored.
Step 2 look at the pulley
Pulleys are made of ordinary metals, even iron and copper. The product quality made of pure copper composite pulley is better, and moving pulley is more labor-saving.
3. Look at the thickness of the air drying rod.
Buying a hanger rod is not as thick as possible, but moderate. A pole that is too thick is too heavy to lift. The pole thickness should be moderate, and the thickness from 1.0 to 1.2mm is more suitable.
4. Look at the surface of the pole
The surface treatment of drying rod mainly includes polishing treatment, electroplating treatment, plastic spraying treatment and electrophoresis treatment. Electrophoresis treatment process is the most complicated, and the surface of the rod is very bright and graded. Polishing treatment is the simplest and belongs to low-end products. The surface of this rod looks bright, close to the primary color of aluminum alloy, but it has not been treated with any surface oxidation resistance. After a long time, the surface of the rod will turn black.
5. Look at the crank
The crank handle is the core component of the clothes hanger, which is very critical. When you buy it, you should turn the handle directly to see if it is smooth and the noise will be too loud.
6. Look at the expansion screw
Expansion screws are often ignored by consumers, which actually determines whether the product is easy to install and firm.
7, look at the drying rod material
At present, there are stainless steel, Al-Mg alloy and Si-Mg-Ti-Al alloy on the market. Consumers should distinguish between materials. First, pay attention to the description of the merchants and choose the merchants with good reputation. Second, pull both ends of the lever directly. Aluminum alloy bends easily and cannot be repaired, while titanium alloy does not.