1, build a garden. Straighten and level with lines before bricklaying to determine bricklaying area and paving method. Bricks are different in length and height, so it will be easier to build bricks by paving, but the edge of the flower bed will be wider. If the longest edge of the brick is put down, the edge of the flower bed will be shorter.
2. Cement batch heating. During batch scalding, cement sand should be mixed and stirred according to 1: 4. Remember to filter out the coarse stone particles in the batch of scalding sand with a net, otherwise the batch of scalding surface will be uneven. Batch ironing is divided into three steps. The first time, spread the mixed cement mortar on the brick surface, and lock the edge with the target. Second, use a big board to level. Third, plaster the surface with slightly wet cement mortar.
3. On the wooden stool. After the height of both sides of the stool is consistent, put the batten on it, then water the two ends with cement mortar to dry, and then fix them with bricks.
4. draw pictures. After the scalded flower beds are completely dried, they can be painted with white wall paint or all-round white paint. Pay attention to find something to pad the ground when painting, otherwise it will easily dirty the ground. When the paint dries, just plant the plants you want.