Hello, everyone. Today, I will answer your questions about what to do if Yuefeng's water tank fan doesn't turn and what to do if the water tank fan doesn't turn all the time. Many people still don't know what it means. I will share this problem with you today. Now let's have a look!
The fan in the car water tank doesn't work. How do I check the fault?
Under normal circumstances, the fan of the automobile water tank will not rotate until it reaches a certain temperature. If it doesn't turn, you can look at the following reasons: check whether the relay of the fan is broken.
Check whether the fuse is broken.
If all the above are all right, you'd better go to the garage to have a check.
Automobile water tank is an important part of water-cooled engine and the cooling circuit of water-cooled engine. Water is used as the heat carrier to conduct heat, and then large-area fins are used for convection heat dissipation, so as to maintain the proper working temperature of the engine.
Precautions for use: The radiator should not be in contact with any acid, alkali or other corrosive substances.
It is recommended to use soft water, and soften hard water before use to avoid internal blockage and scaling of radiator.
When using antifreeze, in order to avoid radiator corrosion, please be sure to use long-term antirust antifreeze produced by regular manufacturers and in line with national standards.
In the process of installing the radiator, please don't damage the heat dissipation belt (sheet) and bump the radiator to ensure the heat dissipation ability and sealing.
When the radiator is completely drained before adding water, turn on the drain switch of the engine cylinder first, and then turn it off when there is water flowing out to avoid blisters.
Check the water level at any time in daily use, and add water after stopping the machine to cool down. When adding water, slowly open the water tank cover, and the operator's body should be as far away from the water inlet as possible to prevent high-pressure steam from spraying from the water inlet and causing burns.
In winter, in order to prevent the iron core from cracking due to icing, such as long-term parking or indirect parking, the water tank cover and drain switch should be used to drain all the water.
The effective environment of standby radiator should be kept ventilated and dry.
What's wrong with the car cooling fan not turning? How to solve this problem?
With the rapid development of life, cars have entered our lives. Cars are important to everyone. Whether going to work or going out to play, cars are basically everyone's first choice. Since cars are so important, we need to take better care of them. The cooling fan is not only an indispensable accessory in computers, but also in automobiles. If the radiator fan of the water tank does not rotate while driving, the antifreeze in the engine water tank will be too high immediately. When the water temperature is too high, the water vapor in the water tank will be ejected from the pressure relief hole. This is a very dangerous situation and needs to be stopped immediately.
The reasons why the car fan does not rotate are as follows:
1, the water temperature is too low;
2. Relay failure;
3. The temperature control switch is faulty.
No matter whether the water temperature meets the requirements or not, the radiator fan of the car mostly works by electronic temperature control, so generally, the fan will start to rotate normally only when the water temperature in your car reaches the required temperature. If the temperature is too low, the radiator fan will not rotate. When the radiator fan of your car doesn't turn, first check whether the water temperature meets the requirements. Relay failure, if the water temperature meets the requirements, the radiator fan of the car still can't work, then there may be something wrong with the relay of the fan.
(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)