What are the taboos of nailing on the door frame?
The nail on the door frame leaks money. In geomantic omen, the door is a barrier to block the external suffocation and attract good omen. Every room in the house has a door. Many friends will nail some things behind the door for convenience. They didn't know that such a simple move gradually revealed the wealth at home.
Especially for the bedroom where the wind is hidden and the spirit is generous, don't nail the door, otherwise it will only make the wealth at home drain faster. Now that technology is developed, you can choose seamless hooks or nail-free hooks behind the door, which can avoid the leakage of wealth.
What are the construction methods for door frame installation?
Construction method of door frame installation: Before preparing to install the door leaf, check whether the upper, middle and lower parts of the door frame are equal in width. If the difference exceeds 5mm, it must be trimmed. Check the opening direction of the door leaf and mark it, so as not to install the fan incorrectly.
1. Before installing the door leaf, measure the net size of the door frame in advance, consider the size of the air gap (looseness), and then further determine the width and height of the fan for trimming. The door leaf should be set on the door frame, and the tightness of the door frame should be checked and corrected. Because wood has the nature of drying, shrinking and swelling, the thickness of paint on door leaves and door frames needs to be set aside, so it is necessary to leave seams when installing. The vertical seam of the door leaf is generally reserved with 1.52.5mm, which shall be planed according to this size.
2. Key points of construction: Use a wooden wedge to temporarily erect the planed door leaf in the door frame, and draw the hinge position after arranging the gaps. The distance between the hinge position and the upper and lower edges should be110 of the height of the door leaf, which is beneficial to the stress of the hinge and can avoid wedging. Then remove the fan and shovel out the hinge slot with the fan. The hinge groove should be shallow outside and deep inside, and the depth should be able to hang the fan. Check whether the gap meets the requirements, whether the fan is flush with the frame and whether the fan can be turned off. After inspection, put all the screws together.
3. Installation quality requirements When installing door frames or complete sets of doors, the following requirements shall be met. Before installation, the door frame should be corrected and the diagonal brace should be nailed. Door frames without doorsill should be nailed with horizontal stays to prevent deformation during transportation and extrusion. Door frames (or complete sets of doors) should be installed according to the horizontal elevation and plane position required by the design during the wall-building process.
4. When it is necessary to build a wall before installing the door frame, it is advisable to leave a gap on the door frame while reserving the door opening, and then seal the gap after the door frame is in place. When one side of the door frame needs to be inlaid with panels, the door window frame should protrude from the wall, and the protruding thickness should be equal to the thickness of the plastering layer. The gap between the door frame and the external wall masonry should be filled with thermal insulation materials.
5. The installation of hardware for doors and windows shall meet the following requirements: the hardware shall be completely installed, correctly positioned and reliably fixed. The distance between the hinge and the door and its lower end should be110 of the vertical height, and the upper and lower risers should be avoided.
6, after installation, the switch should be flexible. Hardware should be fixed with wood screws, and nails are not allowed. The driving depth 1/3 should be used and then screwed in. It is forbidden to enter the full depth. When hardwood is used, 2/3 deep holes should be drilled first, and the aperture is 0.9 times the diameter of wood screws. Door lock should not be installed at the joint between concealed riser and vertical edge.
I believe everyone should have a basic understanding of the taboo of nailing doorframes. In daily life, I suggest you know more about Feng Shui to make your house more comfortable. The above is about the taboo of door frame nail and the introduction of the installation and construction method of door frame. I suggest you at least prepare for the house decoration in advance.