Where do you put the old stone roller?

Stone mill was a grain processing tool more than 7000 years ago. Yellow sandstone, cut. The grinding disc is sole-shaped, with a flat front end and four short legs chiseled at the bottom. The grinding rod is nearly cylindrical, slightly thinner in the middle and slightly thicker at both ends, which is caused by long-term grinding of the cover.

The stone mill is shaped like a long slate, and its two ends are curved like soles. The stone mill is made of a whole piece of sand with a slightly concave front, which may be caused by long-term use. Most stone mills have four cylindrical grinding legs at the bottom, which are 3 to 6 cm high. Generally, the stone mill is about 70 cm long, with a maximum length of 1 m and a width of 20 cm to 30 cm. Matching it is a stone roller, which is generally about 30 cm to 40 cm long and about 6 cm in diameter. It is hard to imagine that 7000 years ago, in such a distant era, human beings could figure out a processing tool for hulling grain with a whole slate. What is even more difficult to understand is that this production tool embodies the high wisdom of primitive human beings.

Unscramble the geomantic function of stone mill;

The millstone is a white tiger, which is generally used for porch feng shui. Used by the Castle Peak Evil Spirit or the Duan Long Yin Evil Spirit. However, it must be placed after surveying the actual terrain and the situation of Jiugong, otherwise it will be harmful to people's health.

There's a saying that there are no bones left. A millstone is something with a heavy shade. It is best to put it in the northeast or northwest of your home.