How to change the Wuling Light Warm Air Trough?

Replacing the heater tank is mainly to remove the heater tank, and then install a new heater tank in turn according to the removed steps. The operation steps are as follows:

1. First remove the negative pole of the power supply, as shown in the figure.

2. Then remove the two screws on the glove box, as shown in the figure.

3. Remove two sets of screws on the instrument panel. As shown in the figure.

4. After removing the instrument panel, you can see the wire harness with fog lights and electric rearview mirrors behind it, and remove it, as shown in the figure.

5. Then remove the hood cable (remove these two screws and move forward to remove them), as shown in the figure.

6. Then remove the navigation, as shown in the figure.

7. Then remove the bolts and screws on the heater box, as shown in the figure.

8. Then unplug the outlet connector of air conditioning condensate on the firewall, as shown in the figure.

9. After that, the heater box will be removed. Just follow the above steps to put the newly bought heater box upside down.