For example, tatami in drifting dreamland is made of 20 hemp grass, 10 creeping weed and 5 soft vines.
It takes 5 minutes to finish using an automatic loom. Hemp grass can be beaten with dragonflies or picked at the collection point with starfish on the North Island. Weeds and soft vines should be beaten with soft rattan grass, which is about 3 1~35.
Question 2: How to make tatami Chengde tatami Tang Feng Han Yun will explain it to you! Cracking problem of solid wood home! The change of environment has become the biggest test of solid wood furniture, but after several years, the problems are still widespread and there seems to be no way out. First, it is proved that the problem is really caused by the change of the use environment. Second, manufacturers have not kept pace with the times and continue to adopt the method of sewing and mending.
Chengde Tang Feng Han Yun tatami tells you the solution.
So how to solve the problem? Painting? Accessories? Structure? Plates? Get back together? What is the key to solving the problem? We have been trying to explore. This does not mean to completely solve the problem, but at least it will reduce the occurrence of problems.
For furniture, structure is more important than anything else. Therefore, we think that to solve the furniture cracking and deformation, we must rely on technology and structure.
So what can make the furniture have enough stability? The answer is to use the reasonable structure of modern furniture.
Chengde Tatami Tang Feng Han Yun! panel
The longer, wider and thicker the panel is, the greater the prestress is, and the more uncontrollable it is, which is very different from uniform materials. With the prevalence of minimalism, many desktops and coffee tables are single panels, which greatly enhances the probability of cracking and deformation. If it is a traditional five-in-one board, although it will leave a circle of contraction joints, the structure is really too stable. If it is a composite material or leather furniture, you don't have to think too much. People want solid wood, but they want simplicity, that is, they don't want structure, and the problem is directly exposed. There are not many ways to solve the problem. Generally speaking, the back of thick plate (above 40 mm) needs dovetail puncture technology, and the back of ultra-wide plate (above 80 cm in width) needs to cross to prevent the tile from warping. If the panel is connected with the wooden frame below, there must be a certain space for movement (that is, the direction crossing the wood fiber), otherwise the wood will open the board when it shrinks. In order to prevent hunchback warping, the super-long panel is generally controlled within 180 cm. If possible, try to stop in the middle, the overall effect will not be affected, and the deformation rate will be reduced a lot, such as door panels.
Chengde Tatami Tang Feng Han Yun! structure
The frame itself is the pillar of furniture, which can make the panels light and durable as a whole, because they are the main structures under stress. If the panel is thick enough, it can be directly used as a frame, which is called solid wood furniture. Generally speaking, there are few problems with frames, and some of them are tenons. Most of the reason is that the groove left when assembling the plate is too shallow, leaving no room for expansion of the core plate, which will directly open the mortise and tenon of the frame or other connecting structures. Another issue is resettlement. For example, the wardrobe has a great weight. If the ground is uneven, we must find a good plane. Otherwise, over time, self-weight will lead to the deformation of the whole frame, although it will not be seriously damaged (the wood is elastic), but it will affect the experience of opening doors and drawers.
High-end customized tatami in Chengde, Han Yun, Tang Feng! door plank
Because the door panel is vertical, it does not face the problem of water and sundries like the desktop, and because there is no hard control.
Question 3: The house is decorated and I want to make tatami. What should I do? Strictly speaking, tatami is a bluff, and it can't be called tatami without a platform.
My suggestion is that you make two or four cabinets, the kind without doors, which can be used as small bookcases or display cabinets when standing up, and then put them down to make a tatami platform with straw mats on it. Is it okay?
Question 4: What material is tatami made of? What is the material of tatami? I want to make tatami in my bedroom or balcony. So, what are the precautions? Collected some information, let's study it together. Now, generally speaking, tatami is made of wood. If you want to make a storage grid, you should pay attention to the following points: 1. Try to use high-quality boards. 2. It is best to draw at the grass-roots level. Seal it. In order to prevent moths, you don't need to paint if you don't use it for storage. 3, the place where tatami is made is still due to the floor tiles, and there is not much area and not much money. I wish it were clean inside and out. 4, tatami made into a box is very good, temporarily put the shoes in, you can save space. The spacing between each storage space is not easy to be too large, too large, and the upper laminate can't bear the weight. 5. The partition between the balcony and the living room depends on your environment. If thermal insulation is considered, (colored) aluminum alloy can be used for partition, which is convenient for cleaning and transparent for thermal insulation. If you don't consider thermal insulation, you can decorate it with decorative boards or gypsum to make a symbolic short partition, which will broaden your career and help expand the indoor sight space. If you want to completely separate the second bedroom from the balcony of the living room, you can use a wardrobe, locker or desk. Tatami mainly depends on the height you make. If it is only 10 CM, it is unnecessary, and it is not convenient to make tatami high without special requirements. Real tatami needs to be bought from Japan. The method of making the platform is very simple. Make a shelf with wood square or 15mm board, and then lay a layer of 15mm large core board on it. It's up to you to do the above materials, but you can't use materials that need cement, such as tiles. In short, if the platform is solid wood, it is not recommended to use Daxing board, because there is too much glue, which tastes great after sunlight and is not environmentally friendly. Made of solid wood, with a table, a tea ceremony and two straw mats on it.
Question 5: How is the tatami bed made? There are two modern ways to make tatami beds. The first way is to stick to the ground directly, with a storage bin in the middle, a modern mattress. The other is to put the bed keel directly overhead, with ordinary floor mats or tatami mats on it and a storage box below.
Question 6: How to make tatami platform and its pattern? Manufacturing technology of tatami platform;
1. Legend of tatami platform manufacturing (1): To manufacture the platform foundation, wooden keel or large core board can be used as the keel frame, and the large core board is outsourced to make a wooden platform.
2. Legend of making tatami platform (II): To install tatami with a thickness of 5.5 cm, a frame with a height of 5 cm to 5.5 cm should be made and leveled; Under the floor, drawers or flap storage space can be used to improve the utilization rate of small apartment space.
3. Legend of manufacturing tatami platform (3): Measure the dimension and abnormal angle data in the frame, and customize tatami with a thickness of 5.5 cm. Install tatami as shown below.
In this way, the private space is completed, which can be used for the owner to play cards and make tea, and it is also a good place for children to play and learn, and at the same time make the home more hierarchical and spatial.
Question 7: How much does it cost to make a tatami? How to make tatami? First of all, an example of tatami platform manufacturing:
1. Manufacture of tatami platform: As the platform foundation, wooden keel or large core board can be used as the keel frame, or large core board can be outsourced as the wooden platform.
2. Manufacture of tatami platform: For tatami with a thickness of 5.5 cm to be installed, a frame with a height of 5 cm to 5.5 cm should be made and leveled; Can be made under the floor drawer or flip storage space, improve space utilization.
3. Manufacture of tatami platform: measure the dimensions and abnormal angle data in the frame. And customize tatami with a thickness of 5.5 cm.
Installation steps of manual (SMK-300A) tatami lifting platform (installation is completed by carpenters) (for reference only, please refer to the attached installation instructions for actual installation):
1. Determines the overall size and location of the desktop. It is suggested that the overall size should be between 800 ~1000 mm.
2. Determine the height of the platform (bottom plate+lifting platform+desktop plate+adjusting frame) and make the platform. The height (minimum value) of the adjustment frame plus the lifting platform must be consistent with the dimension H shown in the figure.
3. Make the desktop and bottom plate. Pay attention to reserve the position of the desktop convergent line.
4. Do a good job in the bar, install it, and make the desktop and platform flush.
5. The lifting platform is fixed in the center of the bottom plate.
6. Make an adjustment frame and fix it on the desktop.
7, the floor and desktop with wooden floor, and around the desktop with wooden line edge.
8. Drill a hole (30mm in diameter) in the center of the desktop, and install a decorative cover and a movable cover.
9. Adjust the position of the desktop and fix it on the machine.
10. If the inside and bottom plate of tatami platform are not painted, the thickness of floor wood should be considered in the above steps.
Installation steps of electrical and remote control (SMK-300B, SMK-250B) tatami lifting platform (with the cooperation of carpenters and electricians) (for reference only, please refer to the attached installation instructions for actual installation):
1. Determine the desktop position and switch position, embed the sheath tube, and randomly pass through three power lines (with a random length of 4m) and five-core cables with a line diameter of1.0mm2..
2. Determine the height of the platform (bottom plate+lifting platform+desktop plate+adjusting frame) and make the platform.
3. Determine the size of the desktop and make it well (reserve the edge position of the wooden line around the desktop).
4. Make the bottom plate (see the figure below, the position of the line hole corresponds to the outlet hole of the lifting platform).
5. Make a bar and install it so that the desktop and platform are flat.
6. Make an adjusting frame, and the height of the adjusting frame should be: h minus the minimum height of the lifting platform.
7. The lifting platform is connected to the power supply and fixed in the center of the bottom plate, and the adjusting frame and the desktop are temporarily fixed on the lifting platform in turn.
8. Turn on the power switch of the lifting platform, adjust the position and observe the flatness of the desktop and the platform, plane the adjusting box according to the observation until the desktop and the platform are flush, and then fix the desktop board.
9. Floor table and desktop floor wood, and use wood lines to edge around the desktop.
10. If the inside and bottom plate of tatami platform are not painted and floor wood is used, the thickness of floor wood should be considered accordingly in the above steps.
Question 8: What are tatami materials generally made of? Pine is generally recommended for 5-point tatami platform materials. Here are some commonly used wood for tatami:
Pine: It has moderate hardness, knots and no knots, and a faint wood smell. The price is generally around 800 yuan, and it is one of the most commonly used materials for tatami. Although pine is cost-effective, it would be a waste if you choose to do it yourself or find a construction team to do it.
Cunninghamia lanceolata: The texture is relatively soft, and you can basically break a board by hand, but the price is the cheapest, and it can be made around 500 yuan. This kind of wood has a strong fragrance.
Oak: The hardness is the highest, the material pattern is relatively uniform, and there is generally no fragrance. Price 1500-2000 yuan. If you don't care about money, consider oak.
Other woods, such as paulownia and Fraxinus mandshurica, are not recommended as tatami platform materials because of their low cost performance.
You can go to Beijing Zhuoersi tatami. My aunt did it here, and Anhui workers did it very carefully.
Question 9: How much does it cost to make a tatami? The price of a single tatami is relatively simple, about 200-400 square meters. Depending on the material and thickness, it is generally divided into straw and coconut palm. If we want to make a whole harmonious room, the quotation is more complicated, because there are many materials to be protected, such as floor, tatami, decorative board, wardrobe, bookcase, door, track, heaven and earth bag and so on. It's best to go to the store to see the details, and the Harmony room is completely customized according to customer needs.