The Pacific Automotive Network Sagitar water tank is located between the engine and the front bumper. The car water tank generally refers to the car radiator. The radiator belongs to the car cooling system. The radiator in the engine water cooling system consists of a water inlet chamber and a water outlet chamber. It consists of three parts: main chip and radiator core.
The Sagitar water tank is located between the engine and the front bumper. The car water tank generally refers to the car radiator, which belongs to the car cooling system. The radiator in the engine water cooling system consists of three parts: a water inlet chamber, a water outlet chamber, a main sheet and a radiator core. The steps for adding water to a car water tank are as follows:
1. Turn the pressure cap counterclockwise. If you hear a hissing sound, wait until the sound disappears before opening it again;
2. Add an appropriate amount of coolant Fill the coolant expansion tank to the position between the MAX and MIN scales of the expansion tank;
3. With the coolant expansion tank cover open, start the engine;
4. After starting the engine, the coolant in the tank will slowly decrease. At this time, add an appropriate amount of coolant into the expansion tank until the liquid level reaches the position between the MAX and MIN degrees of the coolant expansion tank;
5. Reinstall the cap, making sure the pressure cap is hand-tightened and fully seated.
First of all, you need to know the reason why the water tank is blocked, and first find out where the blockage is. As long as it's not blocked inside the water tank, it's easy to fix, just clear the pipes. Find a repairman and ask him to remove the inlet and outlet pipes of the heater water tank, and then use a car wash water gun to flush it back and forth until the water flowing out becomes clear.