How to choose the tiles in the bathroom? What are the requirements? What should I focus on?

You will find that some poor quality tiles are laid, and after a period of time, there will be a pungent smell in the bathroom. I always thought it was a problem such as odor-resistant floor drain or toilet, but it was not. The main reason was that the general ceramic tile blank had low compactness and high water absorption (it must be laid after making tea), and the bathroom was wet and cold after being wet for a long time, and the water gradually infiltrated into the blank or sand ash layer, which was not easy to remove. If it is alcohol for a long time, it will have an unpleasant smell. Therefore, it is suggested to choose porcelain tiles for bathroom floor tiles, which have low water absorption rate, greatly reducing the probability of odor in the bathroom (the water absorption rate of all tiles is low, and tiles are very easy to fall off the wall and empty, so it is recommended to cooperate with the application of tile adhesive).

In addition to beauty and elegance, the floor tiles in the bathroom can not be ignored. Because of the special environment of the bathroom, people must consider the problem of anti-skid on the ground, because they didn't consider the problem of anti-skid on the ground. I have also experienced several cases in which the staff fell down because they didn't listen to advice. So when I choose bathroom floor tiles, I try to choose anti-slip tiles. For houses with different heights, it is recommended to use floor tiles with matching sizes to avoid being stiff. For example, if the living room is below 30 square meters, it is recommended to use 60*60cm floor tiles. If it is between 30 and 40 square meters, it is recommended to use 60*60cm or 80*80cm. If it is more than 40 square meters, it is necessary to consider 80*80cm.

Judging from the overall actual effect, it is inevitable and appropriate to lay a whole brick. First, it can cut bricks as little as possible and reduce the amount of tasks. Second, it can save a lot of costs. Generally speaking, the more specifications of floor tiles, the greater the consumption. Because the bathroom has limited indoor space and many corners, most of them use small-sized floor tiles. In addition to the above two elements, you can also match them according to your own design style or hobbies. The tile size used in the bathroom should be defined according to the size of the bathroom. If the bathroom is too big, choose 600*600, if it is too small, choose 300*300, and generally choose the latter. The tiles in the bathroom are generally smaller than those in the living room. According to the home feng shui, the level should be clear, and the living room should be dominant relative to the bathroom. And the main is big, and the secondary is small.

Look at the lights. If you are a dark guard, it is obviously not suitable to choose dark tiles. You should try to choose light tones, and dark brown can be used as a matching design and figure curve. Look at the size. A bathroom with a relatively small total area can use light-colored floor tiles with smaller specifications and models. Because milky white has the effect of expansion, gray black has the effect of visual effect, and the application of small-sized wall tiles also has the effect of expanding space. The road surface can be 300*300, and the wall surface can be 300*600, 200*600, etc. And it is best to spread it horizontally. Look at the relative density of floor tiles. When choosing a floor tile, you can observe from the side whether it is flat or not and whether there are uneven pinholes. At the same time, you can tap the floor tiles and listen to whether there is a creaking sound. The more brittle the sound, the higher the strength of the floor tile.