The reason why the feng shui ball does not turn, and how to debug it when it does not turn.

Firstly, analyze the reason why the Feng Shui ball does not turn: 1. The power supply voltage is unstable, too low, and the water voltage is too small to drive the Feng Shui ball to rotate. This requires us to choose the appropriate water pump according to the diameter of the balloon or its own weight. It is worth noting that the power of water pump is closely related to the manufacturing process of Feng Shui Ball manufacturers. The Feng Shui ball made by high-tech manufacturers has higher roundness, which greatly reduces the friction between the ball and the ball holder, so that the Feng Shui ball can dance freely and quickly under the power of a smaller water pump. In turn, it saves consumers a lot of electricity bills! 2. The stone ball is stuck by sundries. After a long time, the water inside is turbid, or it may be that the water inlet of the pump absorbs some fallen leaves and other sundries, or it may be stuck between the ball and the ball holder, which hinders the normal operation of the Feng Shui ball. Therefore, it is necessary to manually clean and replace the water in the pool to ensure the normal operation of the pump. 3. The angle of tee will change. After a long time, the ball holder changed its original angle under the drive of the ball or other reasons. This requires us to carry out reasonable and effective debugging according to the water outlet phenomenon and experience. The water flowing out of a high-tech feng shui ball is evenly distributed, usually around the ball holder. If this is the case, you can observe the phenomenon of water flowing out of your Feng Shui ball to determine which direction the ball holder is high (low), so as to keep the ball holder level with the hard object below. If the water is uneven when you buy your Feng Shui balloon, it will be difficult. You can only take a chance or ask a professional to debug it. Of course, the feng shui ball doesn't turn. If the above steps are not solved, it is suggested to try the following steps to solve the problem that the Feng Shui ball does not turn, as the case may be. 3. If it is not the above two problems, it is likely that the inclination of the ball disk has shifted. As we know, the rotation of the Feng Shui ball depends on the water pump, but the plate on which the ball is placed is tilted, so that the ball rotates, because after the plate is tilted, the center of gravity of the ball shifts, and the water comes out of the ball nest at the same time, so that the water rushing force is large and small, so that the Feng Shui ball rotates. The displaced ball disc naturally does not make the ball rotate, so it is necessary to adjust the inclination of the big disc. The common tool is a jack, just push one side higher. But this requires a little patience, because it can only be high at most, so we should ponder and experiment slowly. Generally, the masters of professional manufacturers are much faster, have seen more and made more balls. Of course, the feng shui ball will turn again soon. I believe that by installing the above debugging methods, your Feng Shui ball will definitely rotate again.