So how to determine the height of the console that is most suitable for your family? The height of the console should be designed according to the height, and different heights should be selected.
There are three easiest ways to determine the height of the console:
First, the chef's fingers touch the bottom of the sink, which is the most elementary;
Second, the tank height15cm; Below the elbow; The height of the console is15cm; Below the elbow; The height of the stove is 25 cm below the elbow.
Thirdly, the height of the console is determined according to the calculation method of angle science: height ÷2+5~ 10cm.
However, the height of kitchen countertops can't be the same, and the height of the stove should be about 10- 15 cm lower than that of the operation table.
The height of the kitchen countertop is the same, which leads to the low height of the sink, which is likely to cause lumbar muscle strain in the long run. When cooking, the pot is too high. You should drive your arm and don't knock over the jar.
The correct way is that the height of the stove is lower than that of the sink and console 10- 15 cm, and the specific height difference is also designed according to the height.
So now the height of the general operating table is about 90CM, and the stove is 75CM.
After reading these, do you have a good understanding of the height of the kitchen countertop? But not enough!
① The height of common adjusting feet is 10cm, the height of countertops is 4cm, the height of cabinets is 65-72 cm, and the height of cabinets = adjusting feet+cabinets+countertops.
② The depth (width) of the countertop is generally 60CM, which can be increased to 80CM (just the width of 80*80 tiles). The depth of the countertop will affect the installation height of the cabinet.
3, the kitchen can't be a person's world, everyone is different in height, and may change to different chefs periodically? Then install a cabinet with adjustable feet, so that the height of the countertop can be adjusted.
④ The height of family members is different, whose height is the standard? Or is it based on average height? Naturally, the height of the chef is the standard. If it is of average height, no one is comfortable to use it.
Husband and wife often cook together. Whose height is the standard? Often many people cook together in the kitchen, first of all, they should take care of their families with bad waist and wrist. Then, of course, the husband indulges his wife! If there is a clear division of labor, such as one person washing, one person cutting and one person cooking, then different countertops should be designed according to the main users.
6. Rented houses often change tenants. How to design the height of the countertop? Rental housing countertops, if you are willing to spend more money, it is best to do adjustable height; If you want to save some money, make it 8 1CM, because tiles that are just 80*80 don't need to be cut. Anyway, it is not the owner who is not used to discomfort! If you are buying finished products, then the height of about 85CM will be more common.
All landowners, the console before and after the water deflector. Adding a water baffle at the back can prevent residual water from flowing to the wall, and adding a water baffle at the front can not only prevent water from flowing everywhere, but also prevent round objects such as eggs and tomatoes from rolling to the ground.
2. The size design of the kitchen hanging cabinet The height and size of the hanging cabinet should be determined according to the height and width of the operating table. If the hanging cabinet is too high from the ground, it is inconvenient to take things; If the hanging cabinet is too low, it may block the view again. If the height difference between the hanging cabinet and the operating table is too small, it will hit your head, and if the height difference is too large, it is not convenient to take things. The floor height in the hanging cabinet is generally 145CM, but it should be grasped flexibly in actual installation.
The depth of most countertops is 60CM, and the distance between hanging cabinets and countertops is 65 cm-75 cm. But if it is not designed according to the user's height, it is also very inconvenient to use. Can increase the depth of the console, thereby reducing the height of the hanging cabinet, and will not cause the use conflict between the two.
The distance between the hanging cabinet and the countertop can be reduced to 50CM when the depth is 70 cm; The depth of the countertop is 80CM, and the height of the hanging cabinet is reduced to 45CM, so don't worry about touching it. This design is more reasonable and more in line with human operating habits.
There will be a certain gap between the height and depth of kitchen cabinets with different countertops, depending on the height of users, the depth of ground cabinets and other factors. Generally speaking, the depth of the hanging cabinet is generally between 30 and 45 cm.
Is it enough to know the size of the hanging cabinet? Of course, this is not enough. You also need to know the following:
(1), the hanging cabinet is against the wall, and it needs to be 5-6CM away from the wall to facilitate the opening and closing of the hanging cabinet door.
(2) The handle of the cupboard door should be larger, and it is best to use non-slip materials that are not easy to leave grease, so as to facilitate the operation of oil hands.
(3) It is better to open the closet door at the foot of the mountain, or push and pull it, not pull it. Who knows what it feels like to be hit on the head by the closet door!
(4), put the rice cooker, etc. Above the operating table, if hanging cabinets and wall cabinets are installed, the height from the operating table shall not be less than 45 cm.
⑤ Whether the kitchen space is allowed or not, the premise of rice cooker entering the cabinet is to add steam deflector.
3, sink size
(1), the reasonable width of the sink is 430 ~ 480 mm ..
(2) It is appropriate that the depth of the sink is greater than 180mm to prevent splashing.
③ The thickness of the water tank should be moderate, with 0.8~ 1.0mm as appropriate. Too thin will affect the strength of the sink, too thick will affect the washing effect
There are several sizes of kitchen sinks, single, double and triple. Of course, different models and sizes are different.
But in general, the size of stainless steel sink is still relatively standard, and the general size is that a single tank of 60*45cm and 50*40cm is relatively small; The dimensions of double grooves are generally 88*48cm and 8 1*47cm, which are relatively common; Generally, three grooves are 97*48cm and 103*50cm, which are relatively common.
Double grooves look good, but the most practical one is single groove, the size is 60*45CM. If the countertop is big, you can choose a bigger one, and the pot should be completely put down. We need to measure the size of the sink before buying, reserve its position, and then go to the market to buy a suitable pool to avoid the size being too large or too small. If the height is too high, we need to measure it and set it ourselves.
In addition to these, the sink also needs to pay attention to the following points:
(1), the faucet handle is best to use the back of your hand to solve the switch, which saves your hands from being greasy and difficult to touch. The bigger the better, the arm switch can be used when your hands are inconvenient.
② Anyone who uses a pull-out faucet knows that it is more convenient to clean the sink countertop.
③ The sink should be placed near the window as far as possible. First, the lighting is good. Second, the sunlight comes in to reduce the growth of bacteria.