How to connect the water pipe of the heater?

The connection method of heater water pipe is: connect the inlet and outlet water pipes on the heater, and then open the valve.

The installation place of electric heating heater is far away from inflammable, explosive and other dangerous goods and gases. The electric heater should be installed indoors in a dry, rain-proof, snow-proof and moisture-proof place. The installation place of electric heater is well ventilated, and it is strictly prohibited to use it in a sealed box. The air inlet of the electric heater should not be blocked.

The air outlet should be connected with the pipe wrapped with heat insulation material. Be careful that the pipe is not too long, too thin, too bent and too bent. When installing the electric heater, the air outlet must be inclined upwards 15, and the inclination of the machine body should be within 15. It is not safe for heaters and electric heaters to touch wet things such as water.

Extended data:

The use of the heater is described as follows:

Large space heaters should be placed on the flat ground or fixed on the wall with brackets. To ensure correct installation, be sure to check the technical information of the bracket bearing. Wall-mounted installation: If the heater in a large space is installed on the wall, the installation position must be 1.8m above the ground. The distance between the heater in a large space and the ceiling and the side wall shall not be less than 20 cm.

Fix the bracket on the wall first, and then install the heater. Remember that the heater in a large space can't cling to the wall, because clinging to the wall will hinder the smooth airflow and easily cause a fire.

People's Network-Everyone loves heating equipment in winter, but we should also pay attention to safe use.

It's good to see this heater before winter.