Lingxiao Pagoda, commonly known as Jiangjiadu Pagoda, is located on Dingqi Mountain (Wenbi Mountain) behind Jiangjiadu Village in the south of Fu 'an City. Feng shui tower. Provincial cultural relics protection units.
Lingxiao Pagoda is located on Wenbi Mountain in the south of Fu 'an City. The whole tower is made of stone, with seven octagonal floors and a pavilion-like structure. There are six floors, and the remaining height is 22 meters. The base is made of stone, with a height of 0.4m and a diagonal width of 8m. Each floor of the tower is made of rectangular stones, and the corners are made of strips of equal floors. The first and second towers are 3 meters high and divided into multiple floors. Each layer of eaves is made of three layers of stones, with a height of 1 m and a eaves height of 0.8 m, and the eaves face downward to form a slope. The first floor opens north, the second floor opens east and west, and the third floor opens north and south. The tower road in the tower connects the upper and lower doors to the top of the tower. The tower gate is 2.5 meters high and 0.8 meters wide, with a herringbone at the top. Before maintenance, the whole tower was seriously damaged, the top of the tower was damaged, the stone members of the tower body were loose, and the whole tower tilted to the west.
According to Fu 'an County Records, the Lingxiao Pagoda was built by Liang Zhaoyang, the magistrate of Chongzhen in the second year of next year, and Wu Xujian, the magistrate of Chongzhen in the fourth year of next year. There has been no maintenance since liberation, and the pagoda and the seventh floor have long collapsed, leaving only six floors. The structural form is through the center and around the flat seat, and the flat seats of each layer decrease step by step with the separation of the tower body. The tower gate on the first floor faces northeast, with a height of 2.5 meters and a width of 0.8 meters, and the top is built in a herringbone shape. More than two floors stagger two doors. Set stone steps in the tower ventricle to reach the true flat seat on the second floor, then walk around the true flat seat for half a circle, then enter the tower ventricle on the second floor through the stairway, and climb the stairs at 90 degrees to reach the flat seat on the third floor. This cycle, around the true flat seat into the tower ventricle, until it reaches the seventh floor of the tower ventricle. The circumference of the tower is 2 1.8m, and the remaining height is 19. 15m ... The tower foundation is made of stones, with a base circumference of 30.5m, a height of 0.4m and a diagonal of 8m. The tower is paved with a stone, and the corner is paved with a stone of the same height. Eaves are high 1 m, and the eaves are 0.8m.. They are composed of three layers of stones, the front ends of which are rolled up like arches. The octagonal part of the true flat seat is supported by the bucket arch, and the flat seat and the waist eaves are combined into one, which makes people walk far away.
For more information about bid writing and improving the winning rate, click on the bottom customer service for free consultation.