Take Volkswagen as an example: push the gear handle inward with your right hand, and then push it upward to 1 gear. Hold the gear lever and pull it to 2nd gear. Push the gear lever to the third gear by hand. Gently buckle the gear handle with your palm, grab the gear handle with your fingers separately, and pull it down to the 4th gear, with the gear handle still wrapped in your palm. Push the handle outward with the backhand, and then push it up by five gears.
A car that uses a manual shift mechanical transmission (also known as manual shift, MT) to adjust its speed. That is, shifting the gear lever by hand can change the meshing position of gears in the transmission and change the transmission ratio, thus achieving the purpose of speed change. When you press the clutch, you can move the gear lever.
Introduction of manual transmission car;
1, constitute
By switching different gear sets, the transmission ratio can be changed. As the key link of power distribution, gearbox must have two parts: power input shaft and power output shaft. Together with the gears that make up the gearbox, it is the most basic component of the manual gearbox.
2. Principles
The power input shaft is connected with the clutch, and the power transmitted from the clutch is directly transmitted to the gear set through the input shaft. The gear set consists of gears with different diameters, and the power transmission effect achieved by different transmission ratios is completely different. Shifting gears during normal driving means changing the transmission ratio.
3. Function
Drivers can save fuel by choosing the right gear. The reason why the so-called mechanical transmission car saves fuel is because the mechanical transmission has high transmission efficiency and can reduce transmission loss. Driving a car with manual transmission requires a higher level of driving, so it is necessary to select gears reasonably and timely to really save fuel.