Heat air water tank disassembly steps:
1. First disassemble the workbench. There are nine screws on the workbench. Pay attention to which parts have screws. There are two screws on the lower part of the workbench. There are screws inside the edge, and there are two screws just above the wheel arch;
2. Remove the instrument assembly. Pay attention to the instrument connection cable during the disassembly process, and do not break it;
3. After removing the instrument assembly, the whole picture of the heater is revealed. The heater is connected by three screws. Remove the upper screw first, and then remove the other two screws.
4. Then remove the water pipe connected to the heater water tank.
5. Just take out the heater water tank.
6. The picture below is the overall picture of the water tank. Remember not to be anxious during the disassembly process. Remove the connecting wires, connecting screws, and connecting water pipes one by one before taking out the water tank. I hope it can be helpful to you.