How to change the small valve on the water separator if it is broken?

The valve of the floor heating water separator is broken and needs to be replaced with a new valve. It is necessary to close the intake and exhaust valves first, and then remove the broken ones with pipe tongs and replace them with new exhaust valves. When closing the inlet and outlet valves, the rust remover can be sprayed on the rusted rotating parts of the valves, and then the afterburner is used for tentative left-right rotation. Spray more rust remover, turn it left and right several times repeatedly, and the valve will open.

Use skills of floor heating water separator;

1. The water separator can control the heating temperature of each room or area in a shunt way, and users can adjust the room temperature according to their own needs; Through the manual exhaust valve of the water separator, the user can exhaust the gas in the pipeline by himself to ensure the heating temperature of each pipeline.

2. There is a filter at the front end of the oil-water separator. During the annual heating period, users will remove the filter screen at the lower end of the filter regularly or irregularly, and then install it after cleaning to ensure the cleanliness of the water pipe. Rinse the pipe network with clean water after heating.

3. If you are away from home for a long time, you can turn down the circulating water with the main valve of the water separator, and never turn it off completely. If there is no indoor heating all winter, the water in the pipeline will be blown out. The use of water separator can help us make better use of floor heating, which can not only save our money and manpower, but also achieve better and safer home heating effect.

As a systematic project, floor heating, like air conditioning, belongs to high-power electrical appliances and has its own service life. If consumers use it improperly and maintain it badly, they are likely to die in use.

4. When you start heating, you won't feel the temperature immediately. During this period, the indoor concrete floor gradually heats up to store heat energy, and it can reach the design temperature after 2-4 days. If the user heats himself, the water temperature should not exceed 65℃.