How much is the factory decoration (75% for materials, 20% for labor and 5% for other expenses).
Usually per square meter decoration: 650-850 yuan.
Mid-range decoration per square meter: 900- 1000 yuan.
High-grade decoration per square meter: 1200- 1700 yuan.
Factory renovation price is only a reference price. After all, the decoration price will be affected by many factors. For example, there will be such differences in the economic level of different regions. First of all, as far as decoration materials are concerned, their prices fluctuate in different regions. At the same time, due to the different needs of investors in different factories, the decoration price of a factory building is also very different.
What should we pay attention to in factory decoration?
Compared with office decoration, factory building decoration pays more attention to decoration rather than design, and most of them choose simple style, which requires higher construction requirements. ?
0 1. Material selection for plant decoration?
Most of the factories are large, so there is no need for too much design art, and pragmatism is the most important. The choice of decoration materials is very important, especially the floor and top materials. Among them, the ground has wear problems, so we should choose some durable materials. Bearing capacity, anti-static and other factors should be considered. In addition, large enterprises attach great importance to cleanliness and try to consider it when decorating. For example, some mineral wool sound-absorbing boards have low cost, low ignition point and simple operation, and are often used at the top floor of factories. ?
02. Plant-decorated floor materials?
The first thing to consider in plant decoration is the ground part. Some high-quality, low-cost decoration materials, such as floor tiles and composite wood floors, can be used as ground decoration materials for factories. Some factories need to bear loads when decorating, so it is necessary to pour concrete on the ground base. Concrete is divided into commercial concrete and soil concrete. The former cost is slightly higher, but the quality is stable; The latter has lower cost and average quality. Then, lay other hard stones on the concrete base for finishing. In addition, plant decoration should choose anti-static floor or anti-epoxy floor. ?
03. The partition design of the factory building?
The partition design is closely related to the factory layout. You can choose light steel keel gypsum board partition, stainless steel glass partition, aluminum-plastic plate tempered glass partition and pure tempered glass partition. Lightweight steel keel gypsum board partition wall is economical and practical, with low cost. ?
04. Reasonable planning space of the factory building?
The division of the internal space of the workshop is mainly for the operators to make rational use of the space according to the actual use requirements. If there are many equipments in the factory, it is not advisable to set too many partitions and partitions. Try to divide the area according to the background color or some color signs to avoid too many color systems, which will not only make the area division not obvious, but also make people dizzy. In addition, the workshop can be clearly divided into equipment area and office area. When designing this kind of workshop, we must master the close combination of data and various spaces, and consider the circulation between the equipment area and the office area and the interference of dust and noise, so as to facilitate the later management. ?
05. Top surface design of factory building?
The top of a factory building is usually very high. When decorating the top floor, we should first design a reasonable layout of fire protection, ventilation and central air conditioning, especially the necessary hardware facilities for fire protection. The next step is to decide whether to use the ceiling according to the use requirements. There are many materials in the ceiling of the factory building. If you want to be beautiful, you can decorate the top with mineral wool sound-absorbing board, gypsum board, aluminum-plastic board and other materials. Or do not make a ceiling, and use modern methods to partially decorate some facilities that need to be hidden. ?
06. Fire control approval for factory decoration?
The safety of factory operation is the first. In order to solve the safety problem, don't ignore the installation of fire fighting equipment. You need to apply to the local fire department for approval before installing fire-fighting facilities. After the renovation project is completed, you need to apply for approval. Generally, it takes about 10 days to complete the fire control examination and approval procedures. Before the factory is renovated, you can negotiate this project with the local fire company first.