Dongfeng sprinkler sprinkler pump

Before the sprinkler pump works, the liquid storage in the pump must be higher than the pump shaft, so the pump inlet must be connected with an upward elbow, a horizontal pipe and a quick connector, and the center line of the quick connector must be 300mm； higher than the center line of the pump shaft; The air inlet piping system must ensure no air leakage; The suction head of the suction pipe must be submerged under water to prevent air from being sucked into the water pipe; When the outlet pipe is connected to the pump outlet, the length of the straight pipe must be 200 mm or longer before connecting the elbow.

The spray pump adopts external mixing and self-priming structure, and there should be a proper amount of liquid in the pump. After the pump is started, the impeller rotates, forming negative pressure at the inlet of the impeller. The gas in the suction pipeline is mixed with the liquid in the pump and enters the gas-liquid separation chamber through the extrusion chamber. Because of the different specific gravity of gas and liquid, gas is separated from liquid and discharged from the outlet pipe, and liquid sinks in the gas-liquid separation chamber. After many cycles, the gas in the suction tube is completely discharged and filled with liquid, and the self-suction process is completed, and the pump starts normal infusion.

Shower pump can absorb and drain water under pressure. The self-priming pump can directly suck the water in the pond into the tank, or it can be directly connected to the urban street fire hydrant to inject water into the tank for sprinkling operation.