Question 2: What color tiles are better for the roof? Commonly used tiles are blue, green, jujube and khaki glazed tiles. The landlord can choose according to his own preferences. I hope my answer can help you.
Question 3: What tiles should be used for the villa roof? It depends on the style of your villa. Different styles of villas have different roof materials. Generally, the basic style roof adopts dark green glazed tiles, and the sideline is decorated with red tiles.
Question 4: What kind of roofing tile has a long service life? I can only say that the durability of resin tile may be a problem, and long-term exposure to the sun may easily lead to aging and deterioration of the resin. If the manufacturer can have a better solution, it can also be used.
Question 5: What kind of roofing tile should I choose? Colored stone metal tile is better,
1. Earthquake resistance-When an earthquake occurs, metal tile will not fall off like ordinary tiles, thus reducing the damage.
2. Lightweight-light weight reduces the bearing capacity of the building.
3. Convenient construction-light weight, large area and simple fittings, which greatly reduces the construction intensity and shortens the construction time.
4. Economical-the construction can be directly carried out on the roof of the old building without removing any roof materials, thus minimizing the cost of waste treatment.
5. Colored stone metal tile has the characteristics of weather resistance, moisture resistance, salt spray resistance, impact resistance, acid resistance, alkali resistance, heat resistance and incombustibility. This product is based on aluminum-zinc plated steel plate and treated with multi-layer protective film, which can resist severe weather and natural disasters such as severe cold, hail, storm, rain and snow, extreme heat and earthquake. It won't crack, age or burn in case of fire and wind, and its service life is long.
6. It can be used for wood frame, steel frame, all-steel grid and concrete roof.
7. Because it is easy to bend and cut, it is suitable for all kinds of buildings, and can also be safely constructed on roofs with slopes of (12-90 degrees), especially for flat slope reconstruction and roof reconstruction projects. At the same time, it can replace the original clay tile, cement tile, color steel plate, glass fiber asphalt tile, slate tile and so on. Moreover, the original roof does not need to be demolished during construction, and it can be directly constructed. Because metal tile has a large surface area and light weight, it can be bent and cut, and adopts a unique buckle design and structure, which is horizontally nailed and firmly connected. This dry construction is simple, fast and saves materials.
Question 6: What tiles are popular on villa roofs? 10 A good building must be well sheltered during its whole life cycle, and roof tiles are its vital protective coat. For houses, roof tiles have the following three functions. 1, rain leak. After the roof is tiled, the roof should be tightly covered to isolate the rainwater from the roof. No matter how heavy it rains and how long it rains, no matter how windy it is, rain is not allowed to penetrate into the house, otherwise it will damage the decoration and facilities in the house, make it uninhabitable, damage the whole building structure and even end its life. So once leaked, it will bring people a lot of trouble and endless troubles. Therefore, leakage prevention is the first important function. It is not easy for ceramic tiles to be well rain-proof and leak-proof. Since the beginning of human civilization, people have tried their best to prevent rain when building houses. However, despite the use of various materials and tiles for thousands of years, this problem has not been well solved, or it can be solved but it is expensive and cannot be popularized. It was not until recent decades that people developed colored cement tiles, which solved the problem of building leakage prevention well. Not all cement tiles are leak-proof. If the tile structure is unreasonable, the leak-proof effect is poor. Compared with double-grooved tile, single-grooved tile is sewed at the highest point of tile edge, with tight and firm joint lap and small gap, forming an "S"-shaped joint, which is not afraid of crosswind, and the amount of rainwater dripping into the joint is very small and will not leak. The double-grooved tile is not, because the joint is opened at the half slope of the tile ridge, the water inflow is 20 ~ 30 times that of the former, and it is easy to leak in heavy rain. In addition to the structural form, the impermeability of ceramic tiles also has a great influence on the impermeability. The small tile factory with simple equipment and simple technology can not produce high-density tiles, and the water seepage rate is high. When it rains continuously, the rain seeps into the tile, drips from the back and seeps into the house. Only large factories with advanced equipment and technology and exquisite craftsmanship can produce high-density tiles. No matter how long it rains continuously, the tiles are not allowed to seep, and the leak-proof function is reliable. 2. Heat insulation. With the improvement of people's living standards, higher requirements are naturally put forward for living conditions, and living comfort is one of the important indicators. In order to be comfortable, the thermal insulation performance of the house must be good, and the roof tile bears this heavy responsibility. The thickness of ceramic tile itself is limited, only more than one centimeter, so it can't keep warm. Thermal insulation depends entirely on the tightly sealed air layer under the tiles. The more sealed and insulated, the better, otherwise this gap will not have much effect. It's like double-glazed insulation. Although there is only a thin air layer between the two layers of glass, as long as the four sides are tightly sealed, the heat insulation effect will be good. Ventilation on all sides will not work. The same is true of tiles. The colored tiles produced by the big factory have accurate dimensions, reasonable overlapping structure and no warping. When erected, they are like a whole, tightly sealed. In addition to good rain and wind protection, they naturally play a good role in heat insulation. Small factory tiles, especially the eliminated double groove tiles, are difficult to overlap closely, and the thermal insulation performance is inevitably poor. The insulation effect of the two will be 3℃~4℃ worse. So when choosing tiles, be sure to lap them to see if they are tight. 3. decorative. Building a house is the same as making clothes. Besides wearing clothes, you must want to have a unique and beautiful appearance. Colored cement tile is the "coat" of the house. The color of tile, the design of tile shape and the quality of paving play a decisive role in the appearance of a building. The coat of roof tiles is much more important than people's coats. If the coat is not suitable or beautiful, you can change it immediately, but the tiles are not suitable, which is easier said than done, which is both costly and time-consuming. The coat of a house will last for decades. Therefore, be careful when choosing tiles, and you can't miss the big event because you saved a little money for a while, and you will regret it! There are the following kinds of roof tiles to look good: 1. The tone is soft and even, good, not dazzling and bright, and it is best to be matte. Small factory tiles are often ugly because of poor material and poor color tone. 2. There is no color difference between tiles. After going to the house, the color of each tile is very uniform, with no shades or spots. 3. The color lasts for a long time, and it won't fade in the sun and rain. Some small factories can't spray mud evenly because of poor equipment and technology, but use paint to spray color. In a short time, the paint of this kind of tile falls off and exposes the bottom, so the colored tile will lose its color and mottle is very ugly. 4. The tile-shaped slope is soft and gives people a sense of beauty. The ceramic tile modeling of the big factory is carefully designed by experts from an artistic point of view, and it will give people a beautiful and cordial feeling when laid on the roof. The tiles in the small factory have not been designed in this way. After being laid on the house, it gives people a feeling of mechanical rigidity and looks very uncomfortable. 5. Accurate size, tight lap joint and small paving error. Good colored cement bricks are laid in a straight line, as neat and beautiful as printing. Large size error or warpage, > >
Question 7: What tiles are suitable for the roof of quadrangles? The tiles of quadrangles are generally Xiaoqing bricks, which are simple in texture, universal in the whole country, low in cost, and especially rich in Chinese flavor with white walls and blue bricks.
I don't advocate the use of glazed tiles, which was not allowed in the imperial era. Glazed tiles can only be used in royal buildings and temples. At first glance, they are not residential buildings. They are endowed with a lot of political and religious meanings. If glazed tiles are used in residential buildings, it is actually a trend, which is not only aesthetically vulgar, but also subconscious ideas to enhance their status through advanced materials, but it is counterproductive. It's like working in a field in a straight suit. It's not only unnecessary, but also ridiculous.
In the private gardens of the top tycoons in the south of the Yangtze River in the late Qing Dynasty, all of them used small blue tiles, and most of them were slab tiles, and few of them were used for special parts such as pavilions and gatehouses.
The quadrangle design of the new house uses all small blue tiles.
The picture below shows a slate tile.
The picture below shows the tiles.
Question 8: What are the advantages of roof tiles? The coat of building roof tiles is much more important than people's coats. If the coat doesn't fit or look beautiful, you can change it immediately, but the tiles won't work. As a building material, if it is not suitable, it is very hard to change tiles, which costs money and labor. The coat of the house has been worn for decades. To make the roof tile beautiful, we should pay attention to the following points.
1. The roof tile is accurate in size, closely overlapped and small in laying error. Good roofing tiles, paved in a straight line, are as neat and beautiful as printing. Large dimensional errors or warpage usually make it impossible to lay. If the ceramic tile mold is made of iron, it is impossible to produce ceramic tiles with accurate dimensions. No one can pave the road with this tile. For example, the width of tiles is only 2mm. If 100 tiles are arranged together with a difference of 20cm, which is wider than half a tile, the tile ridge will naturally become inclined and cannot be laid neatly. If the tile is warped, there will be a big gap after paving, which is not beautiful.
2. The color of the roof tile is durable and will not fade in the sun and rain. Some small colored tile factories use paint to spray colors because of poor equipment and technology and can't spray mud evenly. In a short time, the paint of this kind of tile falls off and exposes the bottom, so the colored tile will lose its color and mottle is very ugly.
3. The roof tile has good frost resistance. In the north, it is common that the temperature drops below minus 10℃ in winter. If the density of tiles is not good, resulting in high water absorption, snow water will be absorbed during the day, and the colored layer will burst when it freezes at night, causing it to peel off slowly, thus damaging the tiles. Because the tiles in small factories are not pressed by high pressure and have poor compactness, the service life of the tiles will not be very long. In addition, the lower the thermal conductivity of ceramic tiles, the more it can promote the warmth in the building.
4. The roof tile has good thermal insulation performance. For example, in hot season, buildings with no heat insulation roof tiles will feel the heat wave rolling and can't stop the high temperature outside, especially the roof of the factory building. This working environment will greatly affect the enthusiasm and endurance of workers, leading to a decline in work efficiency.
5. The color of roof tile is durable, and it will not fade in the sun and rain. Some small factories can't spray mud evenly because of poor equipment and technology, but use paint to spray color. In a short time, the paint of this kind of tile falls off and exposes the bottom, so the colored tile will lose its color and mottle is very ugly.
6. There is no color difference between roof tiles. After going to the house, the color of each tile is very uniform, with no shades or spots.
7. The tile-shaped slope of the roof is soft and gives people a sense of beauty. The ceramic tile modeling of the big factory is carefully designed by experts from an artistic point of view, and it will give people a beautiful and cordial feeling when laid on the roof. The tiles in the small factory have not been designed in this way. After being laid on the house, it gives people a feeling of mechanical rigidity and looks very uncomfortable.