1. Water stickers are divided into: non-tearable film labels (water stickers) and tearable film labels (no film labels) or water transfer stickers, water decals, water paper, BC labels, etc.
2. Product features: The main feature is that the printed pattern is directly transferred to the irregular surface with water, varnished or directly baked without any machine. Different materials have different treatment methods, and after treatment, there is no hand feeling and no trace on the edge of the pattern, which can achieve the effect of direct printing of articles. In particular, it has a special effect on the uneven surface of the object.
3. usage: 1 First of all, clean the surface of the attached workpiece to remove impurities such as oil stain and dust. (You can scrub with white oil and alcohol) 2. Put the water sticker in clean water for a few seconds. When the surface film layer starts to separate from the backing paper, pick up the whole sticker. 3. Align the water sticker with the seam position and take out the backing paper. 4. Smooth the pattern with a dry cloth, and squeeze out the water under the pattern to make the surface film close to the surface. For the convenience of transfer, you can use a hair dryer to blow away the water. In particular, the surface of the hand-sprayed workpiece should be pasted with water in strict accordance with the above method, that is, while blowing with a hair dryer, the water should be cleaned with tools, otherwise it is easy to blister and drop the ink layer after baking. 5. Put the materials or workpieces after the above procedures into an oven at 60-80 degrees and bake for 20-30 minutes, so as to complete the last procedure of water transfer printing. (The baking temperature and time vary according to different materials). Tear off the pattern surface film and bake it directly or bake it with protective varnish. After the pattern is processed, the adhesion is very strong, just like being embedded in an article.