Beam pressing machine is a taboo in bedroom geomantic omen. From a scientific point of view, the shape of the beam is prone to oppression, as if something is pressed on the head, which is prone to anxiety subconsciously. Subconsciously raising vigilance makes it easy to have a bad sleep, or it is difficult to fall asleep, which indirectly affects the sleep quality of the owner. When people are half asleep, everything in front of them may become various images, enter dreams and interfere with sleep.
When the house is destroyed by a strong earthquake, the survival probability under the beam is almost zero. On the contrary, because of the collapse and stacking of furniture and walls, some living gaps will be left next to the beams and columns.
Beam press
Figure A The beam is beside the bed.
Figure B: The beam is at the head of the bed
The influence of beam and column mainly comes from the oppressive feeling when the beam is pressed on the bed, which easily affects the sleep of the owner and produces uneasy feelings subconsciously; Convex beams and columns will also interfere with the convection in the gas field, making the gas field more chaotic.
When the beam or column in the room cannot avoid pressing the bed, it can be solved by bedside table or bedside table (as shown in Figure A and Figure B). The width of the bedside table or bedside table should be at least greater than the width of the beam.
If the beam hits ordinary furniture, such as wardrobes, bookcases, etc. It doesn't matter if you bump into a desk, sofa, dresser, etc. As long as people sit on it, it doesn't matter if the beam doesn't press on their heads. If it is unavoidable, avoid staying under the beam for more than 30 minutes.
Pillar problem
Figure c
Figure d
Figure e
The influence of the column is the same as that of the beam, mainly from its oppressive feeling and the flow of the gas field; As shown in Figure C, the gas field flow is influenced by the column, which will directly rush to the bed surface, but there is no air flow on the left side of the column, and the air pressure on both sides of the bed surface will be slightly different, which will have a slight impact on health in the long run.
There are columns in the room, which can be solved by bedside table or bedside table (as shown in Figure C and Figure E).
It doesn't matter if the column is opposite to ordinary furniture, such as wardrobes and bookcases. If it is opposite to the desk and sofa, it doesn't matter as long as people sit on it and don't tangent to the post.
Crossbeam killer
The beam is supported by two walls and suspended in the middle, so it needs to be very strong in material.
From the perspective of building safety, cross-shaped beams are generally bonded with glue or nails at the middle intersection, or two beams can be bonded together. Although the image is beautiful, the middle intersection is the weakest in structural safety. After years of erosion and earthquake consideration, the cross beam is easy to become a safety hazard because of its age and outdated structure.
However, the cross will have the effect of division. If the ceiling is divided into several pieces, it will be divided, split and uncoordinated in image. The ceiling should be flat and should not be designed in various shapes. Its image can easily interfere with sleep and cause many dreams or nightmares.